MSRP:
Now:
$2.48
Was:
— You save
Description
This stopper is designed for use with the SeaLect HDPE drain tube.
Cat No.
|
A
|
B
|
C | D |
K520113
|
15/16"
|
3/4"
|
1" | 2-1/2" |
Related Products

Sealect Stud Mount Kit
MSRP:
Now:
$14.99
Was:
When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. This kit includes four studs, four clamps, four...

SeaLect Kayak Foot Braces
MSRP:
Now:
$35.99 - $39.99
Was:
These are absolutely the best kayak footbraces we have ever seen. They are resistant to any of the things you might run into including water, sand, fish scales, sunlight - nothing will stop these...

SeaLect Stainless Hammock Hooks
MSRP:
Now:
$0.94
Was:
These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example.

Sealect Footbrace converter kit
MSRP:
Now:
$39.25
Was:
used to convert standard footbraces to rudder control. Includes tension adjusters

Sealect Recreational Kayak Hatches
MSRP:
Now:
$19.98 - $71.98
Was:
A lower cost alternative kayak hatch cover
RECREATIONAL HATCH LINE:
These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of...

SeaLect Triple Latch Hatch
MSRP:
Now:
$74.95
Was:
The Sea-Lect Designs Triple Latch Hatch features 3 locking points which, when engaged, cause the camming surface to pull the lid into the gasket creating a water tight seal. The gasket also sit...
Customers Also Viewed

SeaLect HDPE Drain Tube
MSRP:
Now:
$2.01
Was:
This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to...

Potter 19 Bilge Drain
MSRP:
Now:
$2.95 - $22.50
Was:
This Garboard Drain & Plug provides drainage for bilge during haul-out. Design includes integral 1-1/8" acetyl drain tube. Pipe plug ensures a watertight seal. Constructed of sturdy UV stabilized...

Seadog Scupper Valve
MSRP:
Now:
$3.38
Was:
Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in.
Feedback:
Hi Sandra,
Attached is the photo I promised of you of the scuppers...


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Seadog Stainless Snap Handle Drain Plug
MSRP:
Now:
$5.04
Was:
These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a...

Seadog Brass Drain Tube
MSRP:
Now:
$3.38
Was:
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.
Cat No...

Seadog Stainless T-Handle Drain Plug
MSRP:
Now:
$4.46
Was:
These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other...

Stainless Quick-Release Pins
MSRP:
Now:
$2.99 - $4.99
Was:
AISI 304 Stainless
Note: Nominal size is overall length of pin - see sketch below for other dimensions...


Pocket Puller
MSRP:
Now:
$64.99
Was:
Our small boats fill many roles. Exercise, relaxation, exhileration, escape and sometimes we use them to put groceries in the fridge. Next crabbing season try out these Pocket Pullers from Thomas...

Marlow Premium Polyester Double Braid
MSRP:
Now:
$0.60 - $0.70
Was:
Perfect for sheets, halyards and control lines, Marlow's Blue Ocean line is soft and flexible, easily spliceable, heat-set double braid offers the best strength and stretch performance of any...