Silvertip Gelmagic Tubes
A premixed thixotropic glue - Tubs available HERE
GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or weight. GelMagic requires no additional modification with fillers and can be applied to vertical and overhead surfaces without running, eliminating the mess and waste associated with other epoxies.
GelMagic exhibits exceptionally high peel strength and employs a state of the art, two-phase epoxy morphology, which creates an adhesive bond that is tougher, more resistant to embrittlement and has better elevated temperature properties than other room temperature cured epoxy adhesives. GelMagic can be post-cured up to 140ºF for even greater performance.
|Mix Ratio by Volume||100:50|
|Mix Ratio by Weight||100:46|
|Mixed Viscosity||4,000 cps|
|Coverage @ 250 microns (10 mils)||See Appendix A|
|Maximum Service Temperature||170°F (75°C)|
|Minimum Application Temperature||50°F (10°C)|
|Lap-Shear Strength, psi.:||Polyester Laminate: 2,800|
|Wood (Maple): 1,800|
|Galvanized Steel: 1,900|
|Gel Time @ 77°F (25°C)||30 Minutes (100g mixture)|
|Tack Free Time @ 77°F (25°C)||3 Hours|