SeaDog

SeaDog Halyard D Shackle

                          A               B        C               D      ...

Toggle Switch Panel with USB Power Socket

The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power socket output is 4.8A, 2.4A per side. Constructed of...

Seadog Galvanized Top Mount Oarlock Sockets

Sold in pairs.   These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive.

Seadog Galvanized Round Oarlocks

These oarlocks and sockets are made of maleable iron that is heavily galvanized by the 'hot dip' method. Some say they are better than Bronze or stainless. They are certainly less expensive. Sockets are either angle mount or top mount...

Seadog Stainless T-Handle Drain Plug

These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other location will work. You can install a section of tubing or...

Seadog Pop-Out Deck Plates - Black, White & Clear

Sea-Dog Line Pop-Out Deck Plates are UV stabilized and feature an integrated Pop-Up lever which makes opening and closing a snap, no tools required. Engineered rubber O-ring give a watertight fit. Patent Pending. These deck plates are easier to open and...

Small Top Mount Bimini Deck Hinges

These are the bottom hinges that screw directly into a coaming or deck. In the picture above, you can see that the SD-273230 (left) is angled about 5-7 degrees for cambered or canted decks. The photo above shows the difference between top mount and side...

Bimini Top Inserts

These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the inserts for 3/4" tubing are almost a perfect fit in 1/2 steel...

2-3/4" Cast Brass Take Apart Butt Hinges

Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204526 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH SD-204526L 1-1/2" 3/4" 3/4" 2-3/4" 1/16" #6 FH

2" Cast Brass Take Apart Butt Hinges

Cast Brass butt hinges for the boats that deserve or require something better than hardware store hinges. Part# A B C D E Fastener SD-204516 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH SD-204516L 1-1/2" 3/4" 3/4" 2" 1/16" #6 FH

Stainless Short Side Door Hinge

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 5 #8 flat head fasteners.

Seadog 4" LED All Around Light

LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC.Company boilerplate:"LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). 12 Volt DC. Note: All USCG approved navigation lights must be...

Nylon Clamcleats with fairleads

Injection molded nylon A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it...

Seadog Stainless Long D-Shackles

This Long D-Shackle features a proportionally longer length. Designed for rigging applications. Features a screw pin closure for quick removal, making them ideal for rigging applications where fast and/or repeated connecting and disconnecting are...

Seadog Stainless Straight Chock

Keep anchor or dock lines from chafing gunwale or other parts of your boat. Investment Cast 316 Stainless - these are hefty, high quality parts. They will look good on any boat.Part#ABCDFastenerSD-0606005"3/4"1-1/16"3-15/16"#10FH

Stainless Quick-Release Pins

AISI 304 Stainless Note: Nominal size is overall length of pin - see sketch below for other dimensions...

Seadog Stainless Eyebolts

Machined 304 Stainless Used for bow eyes or anywhere a secure attachment point is needed. Metric threads. Part No. A B C D ThreadLength SD-080708 8mm(5/16") 109mm(4-5/16") 17mm(11/16") 76mm(3") 79mm(2-3/4") SD-080710 10mm...

Seadog Oblong Eye Plate

Investment cast 316 Stainless

Seadog Stainless Folding Pad Eyes

304 stainless folding pad eyes. Each includes a rubber friction pad which enables the eye to remain upright or down when desired. Part A B C D Fastener Sd-090125 1-1/8" 1/2" 1/8" 7/16" #8 RH Sd-090145 2" 1-1/4" 1/4" 1" 1/4" RH

Seadog Stainless Tie Down Eye Strap

Forged 304 Stainless - great for anchoring webbing for various uses onboard, such as securing water bottles or any other gear that you might not want crashing around the boat when it moves.Note: Webbing not included. For webbing and buckles click...

Seadog Aluminum Cleats

Cast Aluminum Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration Available in 4", 5", & 6" sizes  

Bags for Sea-Lect Deck Plates with Internal Collars

These nylon bags feature a rigid ring which fits neatly into the corresponsing SEA-LECT Designs Quarter Turn Deck Plates, Screw Out Deck Plates and Recreactional kayak hatches - w/ Internal Collar. The Red bag has a drawstring closure...

Seadog Zig Zag Cleat

Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH

Seadog Premium Brass Top Mount Oarlock Sockets

These are very elegant brass oarlock sockets. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. Not only are these premium sockets nicely finished but they come with nylon bushings The alloy is an...

Seadog Hatch Adjusters, knob type

These hatch adjusters are made from 304 stainless steel and glass filled Nylon. They telescope to open or close hatches, windows, shelves, or tables and are held in place by tightening the knob. Ends swivel 360 degrees for any installation.   Here...

Seadog Stainless D-Shackles

Note: size = pin diameter Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103 Forged 316 Stainless Part No. A B C BreakingStrength SD-147103 5/32" 3/8" 11/16" 1,540 lb. SD-147104 3/16" 7/16" 11/16" 2,200...

Seadog Rubber Pole Storage Clips

Santoprene Rubber We really like these rubber Pole storage clips. We got a new catalog from Sea-Dog and upon seeing these things, we immediately ordered some of each size. Use them to secure paddles, belaying pins, dip nets, fishing poles, whisker poles,...

Seadog Nylon Flange Type Screw-in Drain Plug

These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in the body but still allows easy removal of the plug...

Seadog LED Utility Light

More of a courtesy light than anything. This little LED lights amber and uses an incredibly small abount of electricity. Hook directly to 12 volt source to light the cabin of your little cruiser.  

Standard Side Mount Bimini Deck Hinges

These are the bottom hinges that screw directly into a coaming or deck to mount a bimini. The photo above shows the difference between top mount and side mount and how the end caps or inserts mount on the hinges.

Seadog Stainless, Davis Style, Fold-Down Oarlocks/one oarlock, one socket

We used to carry the bronze Davis fold-down oarlock/sockets but those became unavailable. Finally after about a year, we are now able to offer this stainless steel version. Just lift the oarlock and flip it down to get it out of the way when you are not...

Seadog Brass Single Coat Hook

Cast Brass coat hooks. Nice finish, made in China. A B C D E Fastener 1-9/16" 1/2" 1-3/8" 1" 1-3/4" #6 FH

Stainless "D" Rings

AISI 304 Stainless Part # A B C "D" - SD-191830 3/16" 15/16" 1"

3" Stainless Butt Hinge

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 6 #8 flat head fasteners.

Seadog Quarter Turn Deck Plates - Black & White

A quick opening deckplate These Quarter-Turn Deck Plates feature a new locking system that prevents over tightening, jamming, or cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge...

Seadog Heavy Duty Zinc Plated Steel Oarlocks

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits modification to accomodate just about any shaft...

Seadog Stainless Jaw & Jaw Swivels

Note: size = diameter of pin Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these jaw to jaw swivels are...

Seadog Galvanized Screw Pin Anchor Shackle

Forged, then hot dipped galvanized SD-147804, SD-147806, SD-147808 Part No. Size A B C D Weight SD-147804 3/16" 1/4" 3/8" 9/16" 13/16" .04 lb. SD-147806 1/4" 5/16" 7/16" 3/4" 1-1/16" .07 lb...

Seadog 4 Wire Inline Trailer Plug Tester

Nylon/StainlessIncludes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC.

Seadog Nylon Cleats

Your basic black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 3" ,4", 5", & 6.5" sizes  

Seadog Terminal Post

Nylon/Stainless Includes cover to meet ABYC/USCG Requirements. Maximum Amps: 150. Maximum Volts: 48 DC. A B C D E F Fastener 3-3/4" 1-11/16" 1-5/8" 1-5/16" 2-3/16" 5/16-18 #8 RH

Seadog Forged Brass Pad Eyes

These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included). Part # A B C Fastner SD-081270 5/16" 3/8" 1-3/8" #8...

Nylon Short Side Door Hinges

These glass-filled injection molded nylon hinges have a stainless steel pin and are practically indestructable. They are economical too. Use them for all interior and exterior applications on your boat - hatches, folding tables or seats, windows and much...

Stainless Door Hinge

A high quality stamped 304 Stainless Steel hinge at an economy price. Takes 6 #8 flat head fasteners.

Seadog Zinc Plated Steel Oarlocks

These utility oarlocks are good for beginners as they hold the blade in position. They will clamp onto a shaft from 1-1/4 to 1-3/4 inches in diameter without modification. Mild steel construction permits adjustment to accomodate just about any shaft size...

Seadog Short LED All Around Light

Injection molded polycarbonate - 12 Volt DC. LED All Around Lights are approved for USCG 2 NM (Colreg 2 mile). Part# A B C Fastener SD-400042 4-5/16" 1-1/8" 2-1/4" #12 RH  

Aluminum Side Entry Clamcleats

Aluminum The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. These cleats were strongly recommended by Mike Storer. Click to view/download installation guides:  SD-002171 SD-002172

Seadog Scupper Valve

Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in. Feedback: Hi Sandra, Attached is the photo I promised of you of the scuppers installed on the Escargot canal boat I am building. They appear...

Seadog Premium Brass Ribbed Horn Oarlocks

These are very elegant ribbed horn oarlocks. They would be right at home on a John Welsford Joansa, or any rowboat, for that matter. The alloy is an engineered high class brass for increased durability and corrosion resistance. The chemical composition...

Seadog Stainless Twisted Shackles

Note: size = pin diameter Forged 316 Stainless Part No. A B C Breaking Strength SD-147403 5/32" 5/16" 1-1/4" 1540 lbs SD-147404 3/16" 3/8" 1" 2,200 lbs SD-147406 1/4" 1/2" 1-1/4" 3,300...