Sailboat Hardware

PLEASE NOTE, WE CURRENTLY ONLY HAVE THE ZERO DEGREE MOTOR BRACKET 2/24/2023 Dimensions: The plate is 1/8" thick stainless steel - 6" x 7-1/2". The mounting legs are from 1/2" dia SS rod. The bracket sits an average of 6-1/2" from the transom (not...

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

RL-328 - Fixed Gooseneck - Screws or rivets to standard boom and mast. Base is 1.5" x 3".Shown here with tangs

Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not recommended for use mounting these cleats on a boat. We...

Comes with manufacturer two-year warranty Sheave size - 22mm / 7/8" Max line size - 6mm / 1/4" Overall Height - 43mm / 1 3/4" Weight - 17 grams / .60 ounces Breaking Load - 700 kg / 1,543 lbs Max. Working Load - 100 kg / 220 lbs

Round Brass Thimbles are handy for making authentic rope stropped blocks and many other uses. Scroll down for some examples. CH-FTHE - CH-FTHD - CH-FTHC - CH-FTHB - CH-FTHA Part # OD ID For Rope...

Injection molded nylon A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull. Always tension the rope before it...

Stainless steel - two sizes For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings. Dimensions: Part Length Width Hole dia. Strap thickness RL-245S 5-1/2" 5/8" 0.264" 0...

1/2" pins - 1" & 2" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 2" thick rudder. (note: pintle tangs can be easily adjusted for rudders as...

This Long D-Shackle features a proportionally longer length. Designed for rigging applications. Features a screw pin closure for quick removal, making them ideal for rigging applications where fast and/or repeated connecting and disconnecting are...

See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or with the RL-490 gudgeon if a bolt or rod is run through...

316 Stainless Reference Imperial Metric A 9/16 in. 14 mm B 3/16 in. 4.8 mm C 1 7/16 in. 36.5 mm D 3/16 in. 5.0 mm Weight 0.2 oz...