Description
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a narrow space does not allow a wider gudgeon as in the case of the Weekender. They can also be used on a skeg where a regular gudgeon is used as the upper pivot point.
Weekender Vertical Gudgeon
1/8" thick
1-1/4" wide
5-1/4" long
takes 3/8" pins (should not be drilled larger)
Related Products

Racelite Medium Duty Gudgeons
MSRP:
Now:
$9.99
Was:
Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions.
See our pintle & gudgeon compatibility chart

Pintle & Gudgeon Fastener Kits
MSRP:
Now:
$4.80 - $8.90
Was:
Stainless Steel
Pintles and Gudgeons should always be bolted on. Period. We resisted trying to make kits for all the different pintle and gudgeon sets we sell because there are so many different...

Racelite Light Duty Gudgeons
MSRP:
Now:
$8.99
Was:
See our pintle & gudgeon compatibility chart
Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions.

Weekender Rudder Gudgeon
MSRP:
Now:
$18.99
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is...

Weekender Rudder Hardware Set (includes pins and rings)
MSRP:
Now:
$74.99
Was:
This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The
Customers Also Viewed

Weekender Rudder Hardware Set (includes pins and rings)
MSRP:
Now:
$74.99
Was:
This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made...

Weekender Rudder Gudgeon
MSRP:
Now:
$18.99
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is...

Viadana Transom Pintles and Rudder Gudgeons
MSRP:
Now:
$9.74 - $51.00
Was:
Rudders from 1/2" to 1-3/8"
A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below -...

Canoe/Kayak Rudder Gudgeons
MSRP:
Now:
$8.62 - $18.28
Was:
For sharply pointed sterns
After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the...

Ronstan Stainless Steel Gudgeons
MSRP:
Now:
$16.40 - $79.99
Was:
These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as...

Rudder Hardware for Scamp
MSRP:
Now:
$76.99
Was:
This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down...

Racelite Heavy Duty Pintles
MSRP:
Now:
$13.99
Was:
3/8" pins - 1" - 1-3/8" rudders
These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder...

Racelite Medium Duty Pintles
MSRP:
Now:
$10.99
Was:
3/8" pins - 3/4" - 1-1-4" rudders
These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 3/4" or 1-1/4" thick...

Racelite Medium Duty Gudgeons
MSRP:
Now:
$9.99
Was:
Medium duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions.
See our pintle & gudgeon compatibility chart
RL-360 gudgeonMedium duty stainless steel...

Racelite Extra Heavy Duty Pintles
MSRP:
Now:
$22.99
Was:
3/8" pins - 1-1/2" - 3" rudders
These pintles come in several widths but only one pin length. There is no gudgeon included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders...