Seadog Brass Cleats
- LOA:
- 16'5"/5.00 m
- SKU:
- SD-042103-PA
Description
Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not recommended for use mounting these cleats on a boat. We suggest much longer screws or through bolts for rugged applications.
Additional Information
Designer Name: |
Paolo Lodigiani |
Sail area (Imperial / Metric): |
150 sqf/14 m2 |
Rig Type: |
Gaff, Sloop |
Keel Type: |
Daggerboard |
Rudder: |
Kick-up |
Length (range): |
16' - 23'11" / 4.88m - 7.29m |
LOA: |
16'5"/5.00 m |
Length at Waterline: |
16'1"/4.90 |
Beam: |
9'11"/3.00 m |
Hull Weight: |
200 - 999 lbs / 90.72 - 453.14kg |
Estimated Hull Weight: |
302 lb/137 kg |
Draft: |
12" - 35" / 30.48 - 91.23cm |
Unloaded Draft: |
2'/0.6 m |
Weight Capacity: |
440 lb/200 kg |
Primary Material: |
Marine Plywood |
Method of Construction: |
Stitch and Glue |
Hull: |
Multihull |
Hull Type: |
Multihull |
Hull Shape: |
Flat bottom |
Power Source: |
Wind |
Motor: |
Outboard |
Horsepower Rating: |
3 HP |
Built-in Floatation: |
Yes |
Trailerable: |
Yes |
Cartop: |
No |
Unit of Measure: |
Metric |
Instruction Manual: |
General Instructions and Sequence |
Lofting Required: |
No |
Recommended Experience Level: |
Beginner |
Designer's Thoughts on Experience Level: |
No |
Boat Type: |
Sailboat |
Related Products
Seadog Nylon Cleats
MSRP:
$1.25 - $5.50
$1.13 - $4.95
Your basic black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 3" ,4", 5", & 6.5" sizes
<
Seadog Aluminum Cleats
MSRP:
$4.95 - $8.25
$4.46 - $7.43
Cast Aluminum
Aluminum tie-down cleats have a smoother finish than the iron, and are lighter if weight is a consideration
Available in 4", 5", & 6" sizes
Seadog Halyard Cleat
MSRP:
$11.25
$8.88
Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting...
Seadog Zig Zag Cleat
MSRP:
$5.25
$3.85
Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".
Seadog Stainless Steel Cleats
MSRP:
$26.45 - $49.95
$20.00 - $37.46
Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the...
Seadog Heavy Duty Nylon Cleats
MSRP:
$1.95 - $3.25
$1.76 - $2.92
Heavy duty black nylon tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4.5, & 6.25" sizes
Seadog Brass Drain Tube
MSRP:
$4.25 - $4.50
$3.83 - $4.05
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.
Seadog 4" Open Base Die Cast Cleat
MSRP:
$12.45
$8.65
These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need...