Racelite Stainless Shroud Adjusters
- SKU:
- RL-245
- Availability:
- Sold Individually
- UPC:
- MPN:
MSRP:
Now:
$8.89 - $9.73
Was:
— You save
Description
Stainless steel - two sizes
For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings.
Dimensions:
Part
|
Length
|
Width
|
Hole dia.
|
Strap thickness
|
RL-245S
|
5-1/2"
|
5/8"
|
0.264"
|
0.075"
|
RL-245L
|
7"
|
5/8"
|
0.264"
|
0.075"
|
Related Products

Viadana Stainless Steel Shroud Adjuster 120mm
MSRP:
Now:
$7.99
Was:
Comes with manufacturer two-year warranty
Length - 120mm / 4 11/16"
Thickness - 2mm / 5/64"
Pin Size - 6mm / 1/4"

Seadog Shroud Adjuster
MSRP:
Now:
$5.29
Was:
Stainless Steel, 4-1/2 inches long, made in Denmark. This is a special purchase available only in limited numbers.

Racelite Stainless Utility Hook
MSRP:
Now:
$5.99
Was:
Stainless hook holds pole diameters to 1-1/2". Takes #8 oval head screws.

Racelite Stainless Exit Plates
MSRP:
Now:
$6.27 - $11.33
Was:
Stamped stainless steel
For use where a line or wire has to pass through a deck or spar
Both plates are 1-1/4" x 2" x 1/16" thick. There are four holes for #8 f
Customers Also Viewed

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Viadana Stainless Steel Shroud Adjuster 120mm
MSRP:
Now:
$7.99
Was:
Comes with manufacturer two-year warranty
Length - 120mm / 4 11/16"
Thickness - 2mm / 5/64"
Pin Size - 6mm / 1/4"

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...

Factory West Wight Potter 15 Mast Step with pins
MSRP:
Now:
$80.00
Was:
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Seadog Shroud Adjuster
MSRP:
Now:
$5.29
Was:
Stainless Steel, 4-1/2 inches long, made in Denmark. This is a special purchase available only in limited numbers.


Ronstan Roller Furling Gear
MSRP:
Now:
$76.99 - $309.99
Was:
Two furlers available & swivels
RF76
Ronstan Above Deck Jib Furler
SS ball bearing swivel unit. Fork & fork take-off with 6.4 mm (1/4") diameter Pins. Overall height 80 mm (3...

Racelite Stainless Chain Plates
MSRP:
Now:
$2.99 - $6.99
Was:
Stainless Steel
Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel...

Stainless Quick-Release Pins
MSRP:
Now:
$2.99 - $4.99
Was:
AISI 304 Stainless
Note: Nominal size is overall length of pin - see sketch below for other dimensions...

Racelite RL-260-S Camcleat
MSRP:
Now:
$11.50
Was:
These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise...