Racelite

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round...

Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one...

For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the...

Stainless hook holds pole diameters to 1-1/2". Takes #8 oval head screws.

Our RL-690 transom pintles are the same as used on most Lightning class sailboats. They are typically mounted on a flat transom and paired with a rudder gudgeon. More details under "Particulars" tab...

See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4"...

We got a special deal from Race-Lite folks on these handy little hooks. They have quite a few and gave us a big discount on them. They are one inch wide, about 1-3/4 inches long and made of 0.060"...

Stainless steel swivel. Strap is 0.06" by 3/8". 3/8"+ between tangs. 1-5/8" long over all.Takes 3/16" x 1/2" pin.

RL-250 - Fixed Gooseneck - Screws or rivets to standard boom - mounting strap is 3/4" wide and set for 2-1/2" mast but could be adjusted 1/2" either way.Shown with tangs

Stainless Steel Chainplates transfer the stress from standing rigging down into the hull. They may also have other uses for all kinds of applications. Use your imagination. Premium stainless steel...

Stainless wrapped fairleads from RaceLite. The smaller one has a 5/16" opening and is suitable for 1/4" lines and smaller. The larger one has an opening of 1/2" and should not be used with line over...