Racelite

Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice. Part No. Mast...

RL-328 - Fixed Gooseneck - Screws or rivets to standard boom and mast. Base is 1.5" x 3".Shown here with tangs

1/2" pins - 1" & 2" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 2" thick rudder...

See our pintle & gudgeon compatibility chart Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or...

Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

This stainless steel deck plate can be used with our RL-349 shroud adjuster or RL-305-A or RL-205 blocks. It comes complete with 3/4" x 3/16" clevis pin and ring. wt 1/2 oz.

RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No...

Reefing Hook - Mount this hook under the Tack Shackle for quick reefing - hook the reef tack under this hook. The base is 1/8" thick and 1.5" x 0.75". The two hooks are made from 1/4" dia. round...

Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and one...

For travelers, jibs, sliding stays, etc. 1/4" diameter ring. 5/8" x 3/4" opening. Slide length 3" with thumbscrew for easy adjustment. Stainless steel construction. Fits 5/8" sailtrack.

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the...

Stainless hook holds pole diameters to 1-1/2". Takes #8 oval head screws.