Plans & Kits

This set is recommended by John Welsford for Scamp. The tangs are 2-1/8 inches wide and the pintles have a sturdy 3/8" pin.This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel. (note: pintle...

Length 4795 ( 15´ 8 3/4" ) Beam 767 ( 30 1/4")   Toucanoe is recreational kayak, designed for daytrips with kids and overnight trips with two adults on sheltered waters. Max total load is ca 250kg ( including boats weight ). I would not use...

Length-4250mm (13´11",1/4") Beam-620 (24-1/2") Weight-ca. 18 kg (40 lbs) depending on materials   Note: these plans include full size templates which you can print on your computer's printer. If you live in the USA you will want to print...

For PDF plans, click HERE a stable lightweight boat that can be fitted out for whitewater Designed as a stable lightweight boat that can be fitted out for whitewater or casual fishing, this Clark Fork Drifter is a downsized and much simplified version of...

To download these plans, click HERE The Drifter 12 L is a higher performance version of the Drifter 12, with longer amas, and a taller mast. It can be paddled or sailed with as simple rig using a windsurfing mast. The sail rolls up, and is reefable...

The idea for The TUGGY came from my good friend Craig Titmus of Australia, for a Portable Mini Tug Boat. It includes an ample beam, good freeboard, generous internal volume, multi-seating, and safety buoyancy. It is sturdy, easy to build, portable...

Poke About specifications (all dimensions are maximum): Length = 76 inches Maximum Width = 31 inches Height = 12 inches Hull Weight = 40 pounds Draft = 5 inches nominal Max Load = 260 pounds (occupant, motor, and battery) Hull Speed = 4...

The MINIMALIST is a little different, but in a good way. The single peice hull is easy to handle, and weighs only 30 pounds. The 2 important features of the design are it's quick build time, and low cost. The fact that it can support an adult and child...

LIGHT ROWBOAT, 12' X 45", 60 POUNDS EMPTY Vireo is a very light and simple boat with lines that make for very surprising performance. A while back I built a dink called WeeVee which was the usual 7-1/2' long. It had a V bottom full length and had to be...

CABIN SAILBOAT, 18' X 6", 1300 POUNDS EMPTY A while back I presented a design called Fatcat2 which was a 15' x 6' unballasted sailing cuddy catboat. It is still in the prototype catalog, although one was built a few years ago but never used to...

CABIN SAILBOAT, 18' X 5-1/2", 600 POUNDS EMPTY Normsboat was designed for Norm Wolf of Washington D.C. to join a group of trailer traveling shallow water sailors. He wanted the ability to motor and self rescue in a knockdown. Simplicity of...

SAILING PRAM, 18' X 6.5', 450 POUNDS EMPTY Hapscut, Sailboat, 18' X 6.5', 450 POUNDS EMPTY In 2010 I was lucky enough to sail the TX200 with Chuck Leinweber in his Caprice. Chuck had me design Laguna just for this event and the Laguna fleet did quite...