Plans & Kits

The Kari 24' is based on the Kari 2 which, itself, was based on the lines taken off the original Kari Faering. In the case of this new 24' design the client wanted a rounder hull with slightly harder bilges and so we modeled a 6 plank per side design...

This design is a modern interpretation of the traditional Koa fishing canoes which were 'dugouts' and made from a single log. The hull has a narrow flat bottom with 4 planks per side - the top hull panel has some tumblehome in it to emulate the log shape...

This is the Selway Fisher version of the lovely Whitehall Skiff. The origins of the Whitehall Skiff (or pulling boat) are a little vague - some say that her design came from some of the small workboats around Whitehall in London but others trace her...

The Siam 25 has been drawn up as a open dive and fishing boat for a client in the far East that can also be used for simple family trips around the islands. Her hull has been based on the Rathlin 20' motor launch hull - a robust and stable design. The...

Below are photos of Tim Thedon's Jarvis 21 under construction.               21' Jarvis Particulars LOA 21'4" 6.52m Beam (excl. gunwale rubbers) 7'9"" 2.35m Hull Mid Depth 3'4" 1...

This design is based on a double ended version of our 12' 4" Petite Brise Swampscott dinghy. Swampscotts as a breed usually have a narrow 'tombstone' transom making them more or less double ended (semi Swampscott dorys have a wider transom) - when...

Fred Rebell (1886-1968) was a lone sailor and adventurer - he fled from Latvia to Germany to avoid conscription, stowed away on a Sydney-bound ship and after marrying/divorcing and working in Australia, tried to emigrate to the US but was refused a visa...

Based on our 14' Raven which is one of our most popular canoe designs, this asymmetric version is for single long distance use with plenty of capacity to carry camping gear and provisions. The asymmetric hull shape will make her excellent at tracking,...

I am often asked to modify one of my stock designs to suit individual requirements and that is how the 14' Adirondack came about - this design is a development of the 12' x 39" Adirondack canoe (see earlier on this page) and is a roomy guide boat...

This new design was originally drawn up for Cedar Strip construction but drawings were added later for single skin GRP construction too with the plug based on the original strip planked hull. The hull uses the classic easily driven shape of our...

This is the last of the “bevel bottom” hulls that I will design. There are four of them now, and that should be enough. With the Green River, Cedar River, Naselle River, and now the James Boat designs. Each of the hulls in the...

Note: Full size patterns are available for these plans HERE Bigger - Better - More Stable The new Unicat 2.8. You asked for it and it's finally here. This is not just a lengthened 2.4, it's a completely new hull, designed from the ground up with more...