Paul Fisher

This design is a development of the 18’6” Marathon open canoe with it's easily driven asymmetric hull shape. Beam has been reduced to 28" which is positioned down at the waterline. Like her smaller sister she has 5 planks per side and uses the...

The CR25 (Cruiser racer 25) is a multi-chine ply yacht designed for easy unitized construction with ply bulkheads slotting into ply fore and aft girders to form the basic framework - the girders form cockpit seat and bunk fronts. Stringers are then...

The Edwardian 50 has been designed for canal and inland river use. She has a beam of 7'6" which allows her to navigate much of our inland waterways and a height (air draft) which will let her get under most bridges. Her construction drawings are for...

The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an up-to-the-minute hull shape suitable for both inland and...

This design, for a Dutch client, has 8 planks per side which are simply stitched together edge to edge and finished with epoxy and tape. She may be fitted out in many different ways but the standard drawings show her with a steel centreboard which is...

This canoe is based upon our Baby Raven which is an all round general purpose canoe—this asymmetric version gives a slightly faster craft for single handed use—she would also make a good sailing canoe and would fill the remit of a slightly smaller...

At 26'3" length on deck, the Fulmar is a heavy displacement cruising yacht which fits a spacious layout into a relatively short length. Her construction is of multi-chine ply extensively using pre-shaped ply bulkheads and girders. The forward...

The Galway 18 has been designed as a replacement for a client’s ageing Lysander and incorporates a number of his thoughts and ideas on the design of a safe cruising boat of this size. The main requirement is, of course, that she should be easily...

For something quite a bit larger Kane and Able are two separate Suffolk Beach punts. Both have the same overall length, beam and arrangement. Kane is built using the clinker ply method and computer faired mould shapes for this are given on the drawings...

The Lakeland 25 is a modern double chined pulling boat designed for use on lakes, estuaries and offshore by outward bound organizations, scout groups etc. No frame set-up is required - she is made using simple stitch and tape techniques with computer...

Note: This supplement lets you use the Rose 15'3" plans to build a 17' 9" version described below. You need the Rose 15" 3' plans as well as this supplement.___________________________For those wanting an elegant traditional looking launch to go with...