Paul Fisher

The Skylark 14 is another example of a modified set of standard plans. Mr. Rodrigez of Portugal asked for a longer version of our Skylark 12 and we were quickly able to stretch the original on our CAD system. The new panel shapes were developed very...

This was a commission for David Graham Boatbuilders at Wargrave on the Thames for an electric river launch. The hull is based upon our Edwardian series with a graceful counter stern but instead of the clipper bow, a vertical stem was called for. She...

The hull shape of the Skylark 8 gives plenty of room right forward making her a good load carrier as well as very stable. We have had our whole family (2 adults and 3 young children) in her for pic-nics along the canal. She has a length of 7'11" and a...

Based upon the Pinky fishing boats of Maine and Nova Scotia this neat craft, instead of carrying the traditional cargo of sardines has been laid out with a roomy accommodation for 4 or 5 people in 2 separate compartments. Her double ended hull and deep...

Sapphire is a simple 'V' bottom single chine plywood design and will suit the steam enthusiast who wants a good sized launch which does not take too long to build but which looks very elegant. Construction uses a simple ply framework which is set up...

The Greenland 19 has a simple V bottomed single chine stitch and tape plywood hull designed to ride out rough water with ease and to have a good turn of speed. She has an optional daggerboard box to help in directional stability. The deck is strip...

The Seafox is a development of our Seawolf design using 4 planks per side rather than 2 giving a well rounded and very attractive hull shape. she has storage and buoyancy areas fore and aft and a 3' long cockpit opening. Construction uses 3 sheets of...

The Hawke Bay is a large single rowing skiff designed for a New Zealand client who wanted to go on rowing expeditions around the coasts of North & South Islands. She has been given plenty of freeboard and buoyancy to cater with the sharp chop...

The plans for the 16' Henley Slipper Launch include the hull panel shapes for a single chine "V" bottomed version and we were simply asked to take this model and stretch it to 18' - however, instead of just developing the hull panels, we have completed a...

The Sand Grouse was originally conceived as a more sophisticated version of a Skylark 16 with a pointed bow. An additional chine was added to sweeten her lines and her hull depth was increased to help sitting headroom in the cabin. She has an outboard...

The Pipit has been modeled on the old Hampton type "Flattie" which has a flat bottom over most of it's length running into a moderate "V" aft towards the transom. The bottom also has a reasonable amount of rocker fore and aft and this combination with...

We have often been asked about the design of a more rakish runabout - built in much the same way as the Redshrike (a ply inner skin over frames covered with Mahogany veneer) but with more modern lines - and at last we have been asked to design one...