General Boat Hardware

For fastening to aft cockpit bulkhead. Opening 2-3/4" x 3/4". Takes # 8RH screws.

A quick reference chart of available combinations of color and shape as of March 7, 2025.   6 Colors - 6 Shapes - Many Uses Cylinder - This is a good shape for a parrel, not traditional, but I can't see why it would not work just fine. Cube...

Investment Cast 316 Stainless Steel. Part Number A B C SD-146131 3-5/16" 7/16" 3/4"

These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the deck plate. Lubricate with Teflon grease or Vaseline...

Various sizes, Formed 304 Stainless Steel Part...

Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A curved surface...

316 Stainless ReferenceImperialMetricA15/32 in.12 mmB1/4 in.7 mmC1-3/4 in.44 mmD5/16 in.5.0 mmWeight0.9 oz.25 g

A single high quality, heavy duty stamped 304 Stainless Steel swivel hasp. Takes #8 flat head fasteners. The image shown depicts the hasp with the hinged section open and closed. The image does not mean to suggest that two hasps come in an order...

The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is...

These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example. Part A B C D E SD-671460 15/16" 3/4" 1/2" 1-1/4" 1/2"

This hinge is used to mount a bimini to a standard 7/8" rail. It connects to any of our end caps or inserts.

These die cast chrome plated cleats are interchangeable with Perko® style 1210 cleats. Complete w/ galvanized studs, washers and nuts threaded into each leg of the cleat. This eliminates the need for fasteners and provides a clean looking installation...