4" x 15tpi Keyhole Pullsaw
- SKU:
- WOOD-157007-
Description
Keyhole saws are used to make curved cuts, and by first drilling a pilot hole, closed inside cuts. Because they cut on the pull stroke and have very sharp teeth, they make clean cuts in the most awkward of areas. The blades are made from high carbon saw steel with well sharpened teeth. The Red Beech handles are brass riveted to the blade. This saw has a 4" blade length and an overall length of 10" with 15 teeth per inch.
Related Products
Shark 8" 18 & 23 TPI Super FineCut Double PullSaw®
$11.45 - $28.10
Shark 10-2450
This is a double pullsaw with a straight handle at a better price than the Japanese double pullsaw that we sell elsewhere. Besides the carpentry and cabinet making stuff listed...
Shark 9-1/2" 17 & 9 TPI FineCut Double PullSaw®
$11.45
Shark 10-2440
This is a double pullsaw with a straight handle at a better price than the Japanese double pullsaw that we sell elsewhere. Besides the carpentry and cabinet making stuff listed...
4 oz. x 50" Fiberglass Cloth
$5.95 - $644.50
Used for covering any wood which needs extra protection. Fir or Pine plywood will check badly unless covered by glass and epoxy resin. Many builders prefer to cut this wide cloth into strips for...
4 oz. x 30" Fiberglass Cloth
$4.95 - $539.95
4 oz. "surfboard" cloth 30" wide, great for canoes and kayaks.
There
Power 4 Plans
$540.00
After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction...
Skylark 4' Plans
$61.00
This is a 4' version of our Mark 2 Skylark series of pram dinghies with a beam of 3' (0.92m). The design was developed for "Wood 'n' Tots" toys as a safe fun boat for small children to learn basic...
Ronstan 1/4" Tang
$19.99
6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing holeUsed for terminating wire rigging