MSRP:
Now:
$19.99
Was:
— You save
Description
6.4mm (1/4") dia. clevis pin, 51mm (2") long, 1 x 6.4mm (1/4") fixing hole
- Used for terminating wire rigging
- Grade 316 stainless steel
0.7 oz. - 20 g
Related Products

Ronstan 3/16" Tang
MSRP:
Now:
$21.99
Was:
5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing holesUsed for terminating wire rigging

1/4" (6mm) Ronstan Single, Cheek, Ball Bearing Block 1
MSRP:
Now:
$20.99
Was:
Features:
Low friction
High static and dynamic load capacity
Lightweight
Suitable for screw or pop rivet

Racelite 1/2" Stainless Tangs
MSRP:
Now:
$1.99 - $6.99
Was:
Stainless Steel
These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 1/2" from the ends. Nominal lengths are not from hole centers but total overall...

1/4" (6mm) Ronstan Single, Cheek, Ball Bearing Block
MSRP:
Now:
$15.99
Was:
Features:
Low friction
High static and dynamic load capacity
Lightweight
Double through-bolt mounting fo

Racelite 3/4" Stainless Tangs
MSRP:
Now:
$1.95 - $4.60
Was:
These tangs are made from 0.062" stock and have 3/16" dia holes in the ends. The hole centers are 3/8" from the ends. Nominal lengths are not from hole centers but total overall length.

Ronstan 5/16" Tang
MSRP:
Now:
$25.99
Was:
8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire rigging
Customers Also Viewed

Ronstan 3/16" Tang
MSRP:
Now:
$21.99
Was:
5mm (3/16") dia. clevis pin, 76mm (3") long, 2 x 5mm (3/16") fixing holesUsed for terminating wire riggingGrade 316 stainless steel0.5 oz. - 15 g

Racelite Stainless Shroud Adjusters
MSRP:
Now:
$8.89 - $9.73
Was:
Stainless steel - two sizes
For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings.
Dimensions:
Part
Length
Width
Hole dia.
Strap...

Viadana Stainless Steel Shroud Adjuster 120mm
MSRP:
Now:
$7.99
Was:
Comes with manufacturer two-year warranty
Length - 120mm / 4 11/16"
Thickness - 2mm / 5/64"
Pin Size - 6mm / 1/4"

Racelite Formed Tangs (Hounds)
MSRP:
Now:
$10.99
Was:
Two of these stainless formed tangs constitutes a hound. The ones in the photo above are held together by a twist tie to show how they would be aligned in practice.
Part No.
Mast...

Racelite Stainless Mast Hounds
MSRP:
Now:
$8.99 - $9.99
Was:
RL-425-H - RL-325-H
Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid.
Part No...

Seadog Stainless D-Shackles
MSRP:
Now:
$3.50 - $9.99
Was:
Note: size = pin diameter
Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103
Forged 316 Stainless
Part No...

Clevis Pins
MSRP:
Now:
$0.00 - $3.93
Was:
Stainless Steel Clevis pins and rings.Pins: Example - "3/16 x 1/2" means the pin is 3/16's of an inch in diameter on the shank of the pin and there is 1/2 inch between the head and the hole. See...

Ronstan 5/16" Tang
MSRP:
Now:
$25.99
Was:
8mm (5/16") dia. clevis pin, 64mm (2 1/2") long, 1 x 9.5mm (3/8") fixing holeUsed for terminating wire riggingGrade 316 stainless steel1.4 oz. - 40 g

1 x 19 Stainless Steel Wire Rope
MSRP:
Now:
$0.52
Was:
1/8" available
This is grade 316 1x19 wire rope or cable. It is recommended by most sailors for standing rigging on small sailboats due to its low stretch.
Although the 7 x 19 is sometimes used for...

Boom Bails and Hangers
MSRP:
Now:
$2.99 - $18.99
Was:
Lots of different sizes
RL-333
Racelite Stainless boom bail is 1-1/8" wide but could be bent down to 1" or up to 1-1/2"...