Epoxy & Related

A lot of builders use syringes to get epoxy in small amounts accurately into specific places. The problem is that unless you clean the syringe out, you have to dispose of it. These pipettes do the same job at a tenth the cost.Feedback:I love your...

A premixed thixotropic glue - Tubes available HERE GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. Measuring is easily accomplished by either volume or...

Individual bottles of resin - click HERE for hardener All Raka Epoxies are 100 % solids with no evaporating solvents and have low viscosity for superb penetration and wetting out of wood and fiberglass. The Raka basic marine epoxy resin 127 is our...

This 1.5 oz cloth turns completely clear when wet out. The picture above gives you an idea. Perfect for kayaks and canoes or any part of the boat you wish to finish bright or where Pine or Fir plywood needs enough glass to prevent checking.There is a 10%...

Used for covering any wood which needs extra protection. Fir or Pine plywood will check badly unless covered by glass and epoxy resin. Many builders prefer to cut this wide cloth into strips for stitch and glue construction. It does lie flatter, and if...

Measure and Mix in these handy cups These 16 oz. plastic measuring cups are handy for measuring larger batches of epoxy. Can be used several times over. Graduated scales in both ounces and milliliters.

These syringes are popular for adding precice amounts of epoxy to places that are hard to get to. We have two sizes available - a large, 60 milliliter syringe with a plastic tip and a small, 10 ml one with a blunt metal needle. Large Syringe...

Variously called "stitch and glue", "stitch and tape" or "tack and tape" this method involves joining plywood panels with wire ties, then applying fiberglass and epoxy to either side of this joint. This strong and lignt technique was first used in Great...

4 sizes available Why Braided Biaxial Fiberglass Sleeving? Braided sleeving is a great way to reinforce masts, booms, yardarms, paddle shafts, oars, whiskerpoles - just about anything round. It goes on just like any other kind of fiberglass - put it on...

These fillet sticks are accurately cut from 4mm Okoume plywood to making perfect fillets. They range from 1-1/8" to 1/4" radius. Makes a great gift for a boat building buddy that has everything. For a PDF file containing instructions by Russell...

Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents...

4 oz. "surfboard" cloth 30" wide, great for canoes and kayaks. There is a $10 charge to ship fiberglass orders under 10 yards on a roll. To have your cloth shipped this way, click HERE. Orders of a single size and weight cloth that are 10...