Description
This drain tube consists of two pieces, a tube with a flange on one end and another end piece with a flange. The end piece fits over the tube with a friction fit. The tube can be cut off to accommodate any thicknesss from 3/4 to 2-1/2 inches.
Designed to be used with SeaLect Tapered Scupper Plug.
Cat No.
|
A
|
B
|
C | D |
K520323
|
3/4"-2-1/2"
|
1-1/4"
|
1" | 3/4" |
Related Products

Seadog Brass Drain Tube
MSRP:
Now:
$3.38
Was:
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.

Potter Cockpit Drain
MSRP:
Now:
$45.00
Was:
The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps

SeaLect Kayak Foot Braces
MSRP:
Now:
$35.99 - $39.99
Was:
These are absolutely the best kayak footbraces we have ever seen. They are resistant to any of the things you might run into including water, sand, fish scales, sunlight - nothing will stop these...

SeaLect Stainless Hammock Hooks
MSRP:
Now:
$0.94
Was:
These stainless hooks are attached to a deck to retain a piece of shock cord used to hold down various loose pieces of gear. The picture below shows an example.

Sealect Footbrace converter kit
MSRP:
Now:
$39.25
Was:
used to convert standard footbraces to rudder control. Includes tension adjusters

Sealect Recreational Kayak Hatches
MSRP:
Now:
$19.98 - $71.98
Was:
A lower cost alternative kayak hatch cover
RECREATIONAL HATCH LINE:
These are an economical alternative to the Performance covers. They fit the same rings but are molded from a single type of...
Customers Also Viewed

SeaLect Tapered Scupper Plug
MSRP:
Now:
$2.48
Was:
This stopper is designed for use with the SeaLect HDPE drain tube.
Cat No.
A
B
C
D
K520113
15/16"
3/4"
1"
2-1/2"

Seadog Brass Drain Tube
MSRP:
Now:
$3.38
Was:
When you use either our T-handle or Snap Handle plugs you will get better results if you glue one of these brass drain tubes in first. Order plugs separately.
Cat No...

Potter 19 Bilge Drain
MSRP:
Now:
$2.95 - $22.50
Was:
This Garboard Drain & Plug provides drainage for bilge during haul-out. Design includes integral 1-1/8" acetyl drain tube. Pipe plug ensures a watertight seal. Constructed of sturdy UV stabilized...

Potter Cockpit Drain
MSRP:
Now:
$45.00
Was:
The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Seadog Scupper Valve
MSRP:
Now:
$3.38
Was:
Injection molded nylon, these scuppers function as one-way valves to let water out of your boat but not back in.
Feedback:
Hi Sandra,
Attached is the photo I promised of you of the scuppers...

Seadog Stainless Snap Handle Drain Plug
MSRP:
Now:
$5.04
Was:
These commonly seen snap handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any reasonably smooth 1" hole in a...

Stop Loss Bags
MSRP:
Now:
$0.90 - $10.98
Was:
Effectively save partial cans of paint and varnish
StopLossBags™ are designed for oil, water, & alcohol-based wood finishes. They are not suitable for lacquer.
StopLossBags™ allow you...

Seadog Nylon Flange Type Screw-in Drain Plug 1
MSRP:
Now:
$7.53
Was:
These Drain Plugs are designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more water-tight seal. They also have a captive mechanism that keeps the plug in...

Seadog Stainless T-Handle Drain Plug
MSRP:
Now:
$4.46
Was:
These commonly seen T-handle drain plugs are similar to the ones you see in Wal-Mart, but these are Stainless Steel, not zinc plated steel. They will not rust. Any 1" hole in a transome or other...