MSRP:
Now:
$9.66
Was:
— You save
Description
Stamped Brass/Injection Molded Nylon & Delrin
Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.
WARNING: Test switch for proper function before each use.
Click HERE for wiring and technical info PDF.
Part# | A | B | Kill Style |
420488 | 7/16" | 5/8" | Universal |
Related Products

Seadog Dual Battery Switch
MSRP:
Now:
$27.64
Was:
Machined Brass/Injection Molded Nylon
This is a typical two battery switch. It is

Seadog Illuminated 4 Fuse/Switch Panels
MSRP:
Now:
$29.99
Was:
Fire Resistant Injection Molded Nylon/with Illuminating Switches

Seadog Illuminated 6 Fuse/Switch Panels
MSRP:
Now:
$46.99
Was:
Fire Resistant Injection Molded Nylon/with Illuminating Switches

SeaDog Telescoping Boat Hook
MSRP:
Now:
$34.99
Was:
Sea-Dog® boat hooks are constructed of marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Add in a four-point hook attachment from a over-molded soft rubber coated...

Seadog Halyard Cleat
MSRP:
Now:
$6.96
Was:
Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting...
Customers Also Viewed

Seadog LED Combination Bow Light
MSRP:
Now:
$59.98
Was:
Stamped 304 Stainless/Injection Molded ABS - 12 Volt DC.
These quality LED combination bow lights are approved by the Coast Guard and have a much lower power requirement than incandescent ones. No...

Toggle Switch Panel with USB Power Socket
MSRP:
Now:
$79.95
Was:
The Water Resistant Toggle Switch Panel features five 15A 12 VDC toggle switches with blue LED indicator lights, blue LED lit double USB power socket, ATC fuse holders, and a decal sheet. USB power...


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Aluminum Tri-Fold Pop Rivets
MSRP:
Now:
$0.46 - $33.00
Was:
These Black Aluminum Pop rivets work in a standard pop-rivet gun. These are perfect for attaching Padeyes and other hardware to plastic kayaks or any surface where you are unable to reach the back...

5/16" (8mm) Ronstan Double, loop head Utility Block
MSRP:
Now:
$27.99
Was:
316 Stainless steel cheeks and U.V. stabilised Acetal sheaves ensure a long service life with virtually no maintenance.
Features:
Lightweight durable constructionEconomicalMaintenance free
Used...

5/16" (8mm) Ronstan Double, tube rivet Block
MSRP:
Now:
$16.96
Was:
Features:
Lightweight durable construction
Economical
Maintenance free
316 Stainless steel cheeks and U.V. stabilised Acetal sheaves ensure a long service life with virtually no maintenance. Hollow...

Seadog LED Port and Starboard Navigation Lights
MSRP:
Now:
$49.99 - $55.99
Was:
Stainless Steel (above)or Black (right) finish - 12 Volt DC.
Now you don't have to worry about converting standard nav lights to LED. The LED's actually emit red or green light. This makes them...

Seadog Retro Side Lights
MSRP:
Now:
$28.90
Was:
Plastic/Stamped 304 Stainless Steel - 12 Volt DC. We picked these out for a Rifleman that we were building. We love the retro look
One pair includes one starboard (Green) and one port (Red). NOTE:...

Portable LED Navigation Bow Lights
MSRP:
Now:
$35.99
Was:
burns for over 100 continuous hours on a charge
Since we first started carrying these wonderful LED portable navigation lights, we have sold hundreds of them with almost no complaints. What's to...

1/4" (6mm) Ronstan Triple, 2-axis shackle head Ball Bearing Block
MSRP:
Now:
$41.99
Was:
Features:
Low friction
High static and dynamic load capacity
Lightweight
Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance...