MSRP:
Now:
$0.16 - $0.46
Was:
— You save
Description
Brass screws, while pretty, are not really suitable for boat construction. Galvanic action will reduce them to dust in a few years. So what are they doing here? Honestly, we got them specifically to go with the brass cleats that we sell so often to folks who want them for drawer pulls or other ornamental uses.
The #8 screws are a good fit for our 3" Brass Cleats and the #10 x 1-1/2" ones work best with the 4" Cleats.
Related Products

4" Spring Clamp - 2 pack
MSRP:
Now:
$5.99
Was:
These ToolPro 4â Spring Clamps are strong and hold firmly. They feature rubber tips which wonât damage surfaces, and are made of nickel-plated steel with tempered steel springs. These spring...

4" x 15tpi Keyhole Pullsaw
MSRP:
Now:
$19.95
Was:
Keyhole saws are used to make curved cuts, and by first drilling a pilot hole, closed inside cuts. Because they cut on the pull stroke and have very sharp teeth, they make clean cuts in the most

12" Bar Clamp
MSRP:
Now:
$13.25
Was:
This economical Clutch-Style Bar Clamp has cast heads, coated steel bars, wooden handles and swivel pads, but not the higher price. Affordable enough to fully equip your shop and to solve all your...

Gyokucho Double Edge Razorsaws
MSRP:
Now:
$31.00 - $45.45
Was:
I have used these off and on and especially liked one that I tried in DavidNichols' shop once. So I asked what kind it was and bought one for my shop. I hav

Folding Blade Keyhole Saw with Replaceable Blade
MSRP:
Now:
$21.95
Was:
Like our regular folding pull saw, this is an ideal candidate for the portable emergency toolbox you carry on your boat. Works fine around the shop too.
Here is what Woodcraft says:
Our Pocket...
Customers Also Viewed

Flathead Silicon Bronze Wood Screws
MSRP:
Now:
$0.20 - $1.30
Was:
Silicon Bronze is a fantastic material for boat fasteners. It will outlast even stainless steel in many conditions.
Why do we offer Frearson head screws rather than square-drive (Robertson), slotted...

Bags of Silicon Bronze Ring Shank Nails
MSRP:
Now:
$8.00 - $32.00
Was:
Long a boat building staple, no pun intended, Silicon Bronze Ring Shank nails have always been expensive. So we are offering them individually here in case you don't need a Bag of 100 or worse yet a...

Flat Head Stainless Steel Wood Screws
MSRP:
Now:
$3.45 - $9.80
Was:
18-8 Stainless Steel
Technically, these are sheet metal screws. Somehow we found out that if they are called that, they are much cheaper. Yes, there are differences between "sheet metal screws" and...


Seadog Brass Cleats
MSRP:
Now:
$12.99 - $18.99
Was:
Brass tie-down cleats are polished castings and very handsome. For the 3" and 4" cleats you have the option of ordering brass wood screws for mounting on drawers or cabinets. These are not...

Seadog Forged Brass Pad Eyes
MSRP:
Now:
$2.49 - $2.99
Was:
These Pad Eyes are great for block attachment, controlling lead lines, or creating tie down points. Constructed forged brass wire. Installs with two FH fasteners (not included).
Part...

Driver Bits
MSRP:
Now:
$1.57 - $1.89
Was:
Often the screws that we use for boat building must be driven with special driver bits. We believe these are the most commonly used ones.

Deckplate Wood Screw Fastener Kits
MSRP:
Now:
$1.00
Was:
Stainless Steel
The kit you need will be determined by the material and the thickness of the material that you are mounting to. For wood - if the wood is at least 1/2" thick, wood screws are fine...

Small Bronze Sheaves
MSRP:
Now:
$5.81 - $9.65
Was:
Sand cast bronze
Articles about making your own blocks:
Derek Waters
Nigel McCarter
Tidmarsh Major
If you have read some of the articles in Duckworks (see links below) about making your own Blocks,...

Buck Algonquin Bronze Herreshoff Style Cleats
MSRP:
Now:
$26.50 - $31.00
Was:
Sand Cast Bronze Cleats for any boat that aspires to a traditional look.
It seems like finding bronze hardware is getting more difficult—especially pieces that don't cost as much as you paid...

Silicone Bronze Threaded Rods
MSRP:
Now:
$19.99 - $55.99
Was:
Silicon Bronze All ThreadVariously known as "Ready Rod", "Allthread", or "Threaded Rod", this stuff belongs in every boat builder's shop. Each rod is a box of assorted bolts as you can easily cut...