Sailboat Hardware

RL-425-H - RL-325-H Hounds are what you bolt to a mast to attach a wire stay to. These Race-Lite hounds are the ones made for various boat manufacturers. They are strong and solid. Part No. Mast Size Strap Hole...

V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic...

Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH

The ANDERSEN automatic bailers are available World Wide and recogized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service...

Note: size = pin diameter Above SD-147110 - SD-147108 - SD-147106 - SD-147104 - SD-147103 Forged 316 Stainless Part No. A B C BreakingStrength SD-147103 5/32" 3/8" 11/16" 1,540 lb. SD-147104 3/16" 7/16" 11/16" 2,200...

Comes with manufacturer two-year warranty Material - Aluminum/Stainless Steel Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 21mm / 7/8" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg / 220 lbs

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines Impact resistant, U.V. stablised Nylon Reference Imperial Metric Hole Ø 9/32 in. 7 mm Fastener Ø 5/32 in. 4...

RL-427 - slides on 7/8" sailtrack and has a thumbscrew to stop travel.Shown with boom furler option

Brace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Stainless steel hookNeoprene pad

This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The rudder gudgeons are made from 1" wide strap and are 3/32 (0.090)" thick. The...

Protect your spars These spar kits were inspired by the Oar Leather Kits that we get from Rodger Swanson at Swanson Boat Company. The leather in each kit is 5-6 oz. top grain, vegetable tanned cow hide. Marine tallow is included as the...

These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is used as the upper pivot point. Weekender Rudder...