West Wight Potter

These stainless chainplates are used for both the Potter 15 and the Potter 19.

Potter 15 and Potter 19 halyard kits made from premium low-stretch Marlow Leisure polyester double braid. Conveniently sent in two colors for easy identification of main or jib and cut to...

We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful,...

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well. Some...

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the...

These stainless electropolished Anchor Hangers attach securely to any 7/8 to 1” rail or pulpit and will hold most Danforth and Fortress-style anchors up to 35 pounds, flukes down to prevent...

West Wight Potter-15 Factory Stem Fitting

The cockpit drain looks like the photo - two drain fittings, a two feet of Bilgeflex hose, and two stainless hose clamps

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.  

These are the factory West Wight Potter 19 tangs - Long tangs (6") and short tangs (3")

These U-bolts are used for the chainplates on the Potter 15 and for the Baby Stay on the Potter 19