Paddleboats

Length 5.35mDesigner: Paolo LodigianiChine hull, Stitch & Glue constructionBuilding Skills: amateurThe NAIADE is a two seat NINFA and has similar characteristics. It is not a real double sea kayak, as this would require an extra meter, as well as...

buy Trilars plans to make Larsboat into a trimaran Larsboat was built by Lars Hasselgren to replace a Folboat that had finally met its end. Lars wanted capacity for two, plus decking, as with his old boat. I took Toto and...

The essence of this design lies in its simplicity. Easy to mark and cut panels, folded onto each other, and sealed with Scotch Waterproof Tough Tape. The tape is applied to all seams, folds and edges, and produces a fully waterproof hull, that is as...

The Hazelnut has been designed for those who want a similar hull shape to the Peterborough model but without the turned up ends. This gives a flatter sheer line more like a guide boat—she retains the 5 plank per side shape with tumblehome for ease in...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...

By popular request, we have shortened the Raven to give a canoe easier to car-top on smaller vehicles. She can take 2 adults plus camping gear and uses the same simple stitch and tape construction process. The hull has the Raven family’s 3 panels per...

The Sealion was originally modelled on our Seafox sea kayak but the use of Cedar Strip planking for her construction allows a more graceful and curvaceous shape both for the hull and the deck. She is built over computer faired mould shapes set up on a...

A Strip Planked version of our most popular design - the Fisher Prospector Open canoe - plans include full-size templates for the moulds and the sail plan of the FP16. 15'8" Strip Planked Prospector Particulars LOA 15'8" 4.76m Beam 35" 0...

This is a modern ‘sit-on’ type kayak where the cockpits are essentially open and sealed from the remainder of the kayak. The areas around the cockpits are used for both storage and buoyancy.Construction uses 3 or 4mm plywood throughout and the stitch...

A larger version of the Aloha SUP 13.6" x 30" - 4.11m x 76cm Maximum recommended paddler size is 230lbs/104kg. For printed plans for Big Aloha, click HERE   These pics are of the prototype, flawlessly built by Brian Scarborough - thanks Brian!...

The Carrick open canoe was designed for Tyrone Boats specifically for sail racing. She is certainly fast but is also very handy when paddled. She has 5 planks per side giving her a nicely rounded shape with a wide waterline beam for plenty of stability...

I decided to add this larger version of the Electric Moto Craft to my growing fleet of EMC hulls after a comment and request from one of my YouTube subscribers. He had been watching one of my how-to videos on building the 14ft version of the...