Plans & Kits

The Breton Lugger is a simple 2 chine, 'V' bottomed ply over frame yacht. her hull shape is based on the Breton type made simple in chined plywood. The framework is made up of ply bulkheads edged with pine frames set up with ply bow and stern...

This little ship has been designed for the sailing author Derek Harvey and incorporates many ideas gleaned from his years of sailing experience. The starting point for the design was the requirement for a trailable boat with comfortable internal living...

The Jarvis 17' motor launch has been drawn up for clinker/ply construction - a building jig is made which consists of chipboard mould shapes mounted on a strongback. Ribbands (stringers) are inserted into the moulds at each lap and these help in...

"TRUMPET" - 18' Rough water clinker-built runabout, wood. This is a modified v-bottom outboard powered "pocket cruiser", with cuddy cabin and bunks forward. 6' 6" beam. Includes 1958 original article run in Sports Afield's Boatbuilding Annual, lines,...

For Trover Plans Digital Download, click HERE I had been asked by an aid organization to design the simplest possible inshore and estuary fishing boat for the people of East Timor, the villagers were dependent upon their boats for their survival, they...

A stand up paddleboard 12.9" x 29" - 3.89m x 74cm Maximum recommended capacity is 220lbs {100kg} Weight 25-30lbs/12kg. For Printed Plans for Lanui, click HERE The Lanui paddleboard is a lightweight, inexpensive and quick and easy to build skin-on-frame...

This handy pocket cruiser has been designed for a client who wanted an ultra simple and cheap sailing cruiser for estuary sailing and which would get him across the Channel. The construction could not be more simple and rugged with pre-shaped hull panels...

The 15' Huntsman is a simple 2 planks per side open canoe with a V bottom and single chine making construction fast with the stitch and tape construction method. The canoe can take 2 adults and more if required and is ideal for trekking with camping...

For a digital download of full plans, click HERE Designs come about in all sorts of ways, and this one was more unusual than most. My friend Marcus had been "sorting out" his 19ft long ferro cement Donovan designed keeler and had extracted a casual...

U2-HULLZ , is a wedge design that takes it to the next level. The builder has the option to construct any of 5 defined hull sizes, or anything else of their choosing. The plans are complete, and provide the builder with many options which will...

There are some rowing races that take place at West Kerry in Eire using 27' rowing gigs. The races take place in the open sea, in harbours and estuaries where there is often a severe chop. Each gig takes a crew of 4 with an additional member acting as...

This rowing skiff has been lightly modeled on the traditional Thames river skiffs. They were usually a lot longer and around 4' wide. Here, we have produced a design which will delight the rowing enthusiast who wants a light weight skiff with moderately...