Plans & Kits

A Small but Robust Row, Motor or Sailing Pram. Similar in design to the "WEDGE", but with many modifications. The idea for the EASY ONE came from the readers who requested a simple yet useful small multi-purpose hull design. It includes an ample...

Free Study Plans HERE Volare Console Version Volare comes in three versions. This is the console version, the tiller steered utility version is available as a separate set of plans. There is also a stepped version. They're all 15'4" long, 5' wide. They...

Long time readers may recall this design as being in the prototypes section a while back. One was being built and nearly completed when the builder had to put it aside to work on some realities of life, something that happens to all of us from time to...

About Woods Downloadable Plans Zest is a hiking (no trapeze) singlehanded racing dinghy and is based on my 50 years racing experience, which includes winning 2 singlehanded national championships (see my Biography page for more details). This is the...

For Clarence River Dory Plans Digital Download, click HERE This one began when Boatbuilder Barry Wicks came across a Guy called Mike Maskill, a banjo player residing near Brisbane somewhere. Mike had recognised the dire straights that the East Timorese...

For full Printed Plans for Sweet Pea, click HERE For a full Sweet Pea Plan Digital Download, click HERE Sweet Pea was designed to produce a racer for a club I based on a very large estuary. With a mostly mature membership and close to 200 miles of...

Free plans. To download the file, click HERE 144 by 30in flat-bottomed, round-sided, elegant but easy to build canoe intended for stitch and glue construction using 3/8in marine ply epoxy and tape on the inside and either epoxy and tape or glass...

For Scraps as an instant download, click HERE Our tides here run to 10 or 12 ft, which means that little Spook has to be anchored out in close to 20 ft of water at high tide in order to not be aground at low tide. Spook, my 18ft gaff sloop lives on a...

To download these plans, click HERE I confess that designing and building small boats has become something of an addiction. A couple of years and a trailerable trimaran later (another story), I thought it would be great fun to build a 12-foot version of...

This design is an extended 20' Cambridge type punt but with proportionally more beam. Having said that, the beam can be easily altered by changing the width of the bottom plank/panel and frames. Two methods of construction are shown - ply plank over...

Eventually I tweaked Mixer to have a "through the water" bow. It's the same change that Roar went through to become Roar2. I called the new boat Mixer2 and here are some lines of it.The rest of the boat is identical to Mixer although it appears that I...

The Bullfinch is a typical standard steel narrow boat with a cruiser stern for home construction. The drawings and details are for the hull, deck and superstructure steel work only. Engine bed and rudder details are also shown. A study plan showing a...