Paul Fisher

The Sunray was designed for Brightwater Boats - she is built using the clinker ply method with the ply frames and girders set up together on a strongback. She has a foredeck and aft tank plus side benches.   LOA 11'10" (3.6m); Beam 4'8" (1.43m);...

20' x 5'6" ultra simple light weight stitch and glue sharpie. Can be constructed in 3 sections for easy transport and storage. Also optional cubby and water ballast tank. Pre-shaped side and bottom hull panels are stitched and taped together with ply...

This design has been based upon our Northumbrian Coble designs - the client wanted a very stable seaworthy design mainly for outboard power but which could also be rowed and take a sail plan. Basic construction is for stitch and tape but the moulds/jig...

This is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space. The drawings are originally for steel construction but she could be made out of plywood over a simple...

This is a steel multi-chine motor barge for use in the waters of the UK and Europe, crossing the Channel and exploring the rivers and canals of the European mainland. She has a section of parallel middle-body which means that she can be stretched. She...

The 6’ beam version of the Ptarmigan 15 is quite popular and now we have extended the whole design to 17’x6’11’’. Although only 2’ longer than her sister, the Ptarmigan 17 has quite a bit more volume for...

The North Pacific 60 is a long range comfortable cruising yacht. Designed originally for a client in Hong Kong for use in the Philippines she has a wide beam and relatively shoal draft with a centreboard to enable her to get into anchorages...

The 12'Taw is a simple 'V' bottomed plywood runabout for two people. Construction starts with the plywood frames/bulkheads being slotted onto a plywood central girder and the transom fitted. Bottom stringers are added to stiffen the bottom area...

The client who asked for this design, Jim Ferguson (who has sadly now passed on), wanted a design that could be used in a number of ways - a true multi-role craft for use in Australian waters. The main hull can be used by itself as a simple motor canoe...

CEECAN is a simple river cruiser for outboard power. Her hull may be stretched or shortened to suit and her superstructure and deck layout changed to you own requirements. The drawings give details for the hull and superstructure construction. She may...

The Baby Wren canoe was designed for Tyrone Boats and is a smaller single seat version of our 15’10’’ Wren Canadian canoe. She has a similar hull shape with a flat (but rockered) bottom hull panel and two chines per side. This makes her...

For Motor Sailer Supplement Click HERE Our Rathlin design is not the type of motor yacht that you would normally see these days as a new ‘‘modern’’ design. Most new craft of the motor type to come off the drawing board now,...