Power 4 Plans

Write a Review
Printed plans shipped and PDF plans emailed from Selway Fisher


After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction are available allowing the client to choose or design his own superstructure and layout. (That shown above is just one possibility). Total displacement would be around 8500 lbs. allowing a fair amount of accommodation and tankage and the design will take single or double inboard/outboards.

Construction is based upon pre-shaped hull bottom, frames, transom and fore/aft girders using 38 sheets of 1/2" and 6 sheets of 1" ply. Contact us if you want prices for the design of an internal layout and superstructure to your own requirements.

Note - the drawing package now includes the hull panel shapes for a mark 2 version with an additional chine/plank per side for an easier riding hull plus the hull panel shapes for a 55'x16'4" version and the shapes and construction details for a FRP (foam re-inforced plastic) hull and superstructure for a 38' x 14'9" version.

Power 4 Particulars

LOA 32' 9.76m
Beam 10'9" 3.28m
Hull Mid Depth 4'3" 1.3m
Draft 2' 0.61m
Displacement 8500 lbs 3855 kg
Engine 75 - 150 hp
Hull Shape Flat bottom with 3 planks per side (mark 2)
Construction Methods Ply over frame
Major plywood requirements for hull 38 x 12mm sheets
Guidance Use 6 x 24mm sheets
Drawing/Design Package 11 x A1 drawings + 6 x A4 instruction/spec sheets
Additions and alterations included with the plans

View AllClose

0 Reviews

View AllClose