Paul Fisher

This is a beautiful double ender for simplified strip plank and epoxy construction. Temporary moulds are set up with pre-shaped stem, stern post and hog and then the boat is planked with thin strips...

This is a very simple 11’6’’x5’ ‘V’ bottomed dinghy for general purpose use. Her ‘V’ bottom and 5’ beam gives her both stability and a good turn...

At just over 13' length, the 4m Mini Yacht has 2 berths and space for a portable wc inside plus large areas for stowage or floatation. She has a daggerboard type keel with a steel core and lead bulb...

We have drawn up the steel construction details (hull, deck, sterngear and rudder details only) for this 32' canal boat based on a tug design with a fantail aft end and narrow boat lines amidships...

The Greenshank is a pram version of the Redshank and has a length of 7’6’’ and a beam of 4’. The pram bow gives more space forward for stowing gear or for transporting crew...

The Kennet can be built either as a 20' or a 22' slipper launch details and panel shapes are given on the plans for both versions. She has a "V" bottom forward which flattens out as it runs aft...

The RUFUS 17' motor boat is a simple rugged craft with jaunty good looks. She has 3 chines per side and plenty of freeboard and beam, giving her an excellent carrying capacity and very good...

This is a multi-chine plywood entrant for the Mini-Transat race which takes competitors across the Atlantic to Antigua via the Canary Islands. It is known as one of yachting's most dangerous races...

The Mandarin 17 has a beam of 45” and is designed with traditional oarlocks to mirror the traditional Thames skiffs. She may be fitted with a single or double rowing position and the plans detail...

24’x 6’ using 22 sheets of 3/8’’ and 2 sheets of 1/2’’ ply in it’s basic form. A water ballast tank and motor well may be used and the whole craft made in...

This skiff has been drawn up for a client who specifically wanted to develop a design optimised for the “front rower” rowing system (www.frontrower.com) which allows the rower to face forward...

This attractive pocket cruiser was designed for a client on the island of Mauritius and has some of the hull design features of the indigenous craft with their sweet and not over wide transoms...