MSRP:
Now:
$29.95
Was:
— You save
Description
These vents bring fresh air into a stuffy cabin. Can be used with a dorade box for an all-weather installation.
Made from Dip Molded PVC
Dia. | Height | Mtg. Hole | Int. Color |
3" | 5" | 3-3/4" | Red |
Related Products

Seadog Standard Clear Deck Plates
MSRP:
Now:
$12.99 - $16.99
Was:
Injection Molded ABS
The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments, storage lockers and fuel fittings without removing the lid. Use...

Seadog Polypropylene Screw-out Deck Plates
MSRP:
Now:
$10.00 - $14.00
Was:
Our most economical deckplate
This is a new product from Sea-Dog. Of course, deck plates are not new, but ones made of Polypropylene are. I think these may be better than the ABS ones as...

Sea-Lect Screw Out Deck Plates with Internal Collar
MSRP:
Now:
$11.75 - $15.07
Was:
These SEA-LECT Designs Deck Plates are molded with a collar on the bottom to hold deck plate bags or other round containers. Use silicone sealant on hull or deck surface when installing the...

DPI Screw-Down Deckplates - Polar White
MSRP:
Now:
$9.99 - $15.99
Was:
Made from highly durable, UV-stabilized Polypropylene
These deckplates open easily with a 90° turn. The top covers the entire flange including fasteners for a clean look.

Armstrong Hatches
MSRP:
Now:
$45.00 - $109.00
Was:
Watertight compression deck plates.
Over the years of selling and using various deck plates and hatches we've discovered that very few are really watertight. Fortunately most of them are watertight...
Customers Also Viewed

Potter 15 Singlehander's Package
MSRP:
Now:
$175.00
Was:
This package (which is also suitable for many other small sloops if you adjust halyard lengths) allows the Potter 15 sailor to securely raise and lower all sails without leaving the safety of the...


Small Boat Head System
MSRP:
Now:
$9.00 - $79.00
Was:
Perfect for any small boat without a built-in head
Over the years we've tried a variety of different "heads" on small boats from fold-down seats with waste bags to chemical porta-potties and each has...

Potter 15 End Boom Sheeting System
MSRP:
Now:
$224.95
Was:
This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan...

Anchor Hanger
MSRP:
Now:
$72.99
Was:
These stainless electropolished Anchor Hangers attach securely to any 7/8 to 1” rail or pulpit and will hold most Danforth and Fortress-style anchors up to 35 pounds, flukes down to prevent...

West Wight Potter 15 Lines Package
MSRP:
Now:
$175.00
Was:
Package pictured above is cut from our premium Raid Braid polyester double-braid and color coded with mainsheet and halyards in "Yacht" white and jib sheets and halyard in "Stainless" silver color...

Anchor Roller (bow roller)
MSRP:
Now:
$60.00
Was:
Heavy Stainless Steel
Factory West Wight Potter Anchor Roller - 10.5" length by 2.25" wide.

Teak Handrails
MSRP:
Now:
$29.99 - $49.99
Was:
We brought these solid teak handrails in to service West Wight Potter owners, as the small one-loop rail is OEM for the Potter 15 and the larger 3-loop is OEM for the Potter 19, but these beautiful,...

Factory West Wight Potter 15 Mast Step with pins
MSRP:
Now:
$80.00
Was:
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Fixed Mount Combination Masthead / White All-Round Light
MSRP:
Now:
$55.99
Was:
Fixed MountBlack Polymer and Chrome Plated Zinc Allow TopBulb: 12 Volt (included)Pole: 3/4" Dia. AnodizedBase Dimensions: 1" x 2-5/8"Mounting Screw Size: #8