Description
Most biminis have a point where a hoop hinges open or folds up flat. (See image below) These Jaw Slides do just that.

Similar to our Standard Slides, but this slide opens up so it can be installed without having to slide it along a length of tubing. It only comes in 7/8" ID, but would work on smaller tubing if a shim or bushing were incorporated.

Related Products

Standard Bimini Jaw Slides
MSRP:
Now:
$2.99 - $3.99
Was:
Injection molded Nylon
Most biminis have a point where a hoop hinges open or folds up flat. (See image below) These Jaw Slides do just that.

Square Bimini Jaw Slides
MSRP:
Now:
$2.16
Was:
If you want to make a bimini out of square tubing or even square hardwood, you can use these fittings. Use the regular hinges. The square end cap fits 7/8" inside square tubing - 1" x 1" outside...

Bimini Locking Slide Hinges
MSRP:
Now:
$4.85
Was:
Injection molded Nylon
These are the bottom hinges that go into an aluminum track and have a built in lock to hold everything in place. They come port and starboard.

Jaw Slide & Bracket Fittings
MSRP:
Now:
$1.75 - $4.50
Was:
These Jaw Slide & Bracket Fittings are components in a Bimini top fitting system. Bracket Fittings are designed to mount on the side of the gunnel for a Jaw Slide to snap onto. The Jaw Slide...
Customers Also Viewed

Standard Bimini Jaw Slides
MSRP:
Now:
$2.99 - $3.99
Was:
Injection molded Nylon
Most biminis have a point where a hoop hinges open or folds up flat. (See image below) These Jaw Slides do just that.

Bimini Top Inserts
MSRP:
Now:
$0.68 - $0.85
Was:
These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum is used, but we have found that the...

Bimini Top Caps
MSRP:
Now:
$1.99 - $2.29
Was:
Used on the ends of bimini tubing sections
These are used at the ends of the metal hoops which hold up the fabric on a bimini. We have inserts and caps for both 3/4" and 7/8" tubing. Usually Aluminum...

Boom Vang System for Potter 15 and 19
MSRP:
Now:
$95.00
Was:
Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

DPI Flush Series Access Doors - Polar White
MSRP:
Now:
$50.99 - $129.99
Was:
These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel.
The standard...

Forestay Tensioning Lever
MSRP:
Now:
$75.00
Was:
Mast-raising and rigging goes much easier if you can attach the forestay quickly and easily. These quick-release, adjustable forestay levers from C.Sherman Johnson are the perfect solution for many...

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

DPI Hidden Fastener Series Access Doors - Polar White
MSRP:
Now:
$60.99 - $102.99
Was:
These access doors from DPI Marine are made from hi impact, UV stabilized, polypropylene. They have a thick rubber gasket for a good seal and all the metal parts are stainless steel.
The hidden...

Potter Cockpit Drain
MSRP:
Now:
$45.00
Was:
The cockpit drain looks like the photo - two drain fittings, a couple feet of Bilgeflex hose, and some stainless hose clamps

Heather Instant Download PDF
MSRP:
Now:
$100.00
Was:
Heather is a compact double-ended center cockpit pilot house motorsailer. Her styling was inspired by Scottish fishing trawlers and her trim work by US West Coast trollers. Her construction is mostly...