Fasteners

AISI 304 Stainless Part # A B C "D" - SD-191830 3/16" 15/16" 1"

RAPTOR® nails are not susceptible to the corrosion and oxidation that attacks metal, so your manufactured product retains its beautiful new appearance. RAPTOR® nails and staples can be sanded and sawed without tool damage, so you will not need to...

Stainless Steel The kit you need will be determined by the material and the thickness of the material that you are mounting to. For wood - if the wood is at least 1/2" thick, wood screws are fine. For any material that is 3/8" or less, then we recommend...

Standard rings for use with clevis pins. Style may vary. 18-8 Stainless Steel

Stainless Steel Rigging PinsThese rigging pins have many uses - from tabernacles or mast steps like the one directly below, to gudgeons like the picture farther down. These are currently 1/4" and 5/16" in diameter and range from 2 to 3-1/2 inches...

By popular request we are finally offering one inch nylon webbing and buckles. Since these are sturdy and not really affected by water, they are very useful for many applications on a boat. Some ideas: Keeping hatches closed Holding heavy gear in...

These pins are used for the mast steps on the Potter 15 and the Potter 19. Two required for each mast step.

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

Grab some of these kits for your shop or your boat - or both. You never know when you will need an odd screw, nut or pin.

Stainless Steel Pintles and Gudgeons should always be bolted on. Period. We resisted trying to make kits for all the different pintle and gudgeon sets we sell because there are so many different lengths of bolts needed. Finally we figured out that we...

Various sizes, Formed 304 Stainless Steel Part...