MSRP:
Now:
$4.54 - $5.69
Was:
— You save
Description
Stainless Steel Rigging Pins
These rigging pins have many uses - from tabernacles or mast steps like the one directly below, to gudgeons like the picture farther down. These are currently 1/4" and 5/16" in diameter and range from 2 to 3-1/2 inches long between the ring holes. Later we will be getting other diameters and lengths. Let us know what you need.
Related Products

Viadana Single Ball Bearing Block 38mm
MSRP:
Now:
$12.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and...

Viadana Single Ball Bearing Block w/Becket 38mm
MSRP:
Now:
$14.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and...

Viadana Single Ball Bearing Block 38mm w/Swivel
MSRP:
Now:
$16.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and...

Viadana Single Ball Bearing Block w/Becket w/Swivel 38mm
MSRP:
Now:
$19.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and...

Viadana Double Ball Bearing Block 38mm
MSRP:
Now:
$33.99
Was:
These ball bearing blocks handling lines up to3/8 IN., and are very compact. Used on smallboats, cruisers and keel boats for vang, spinnakerand control line applications. Delrin® cheeks,sheave and...
Customers Also Viewed

Stainless Quick-Release Pins
MSRP:
Now:
$2.99 - $4.99
Was:
AISI 304 Stainless
Note: Nominal size is overall length of pin - see sketch below for other dimensions...

Factory Potter Mast Step Pins
MSRP:
Now:
$6.50
Was:
These pins are used for the mast steps on the Potter 15 and the Potter 19. Two required for each mast step.

Clevis Pins
MSRP:
Now:
$0.00 - $3.93
Was:
Stainless Steel Clevis pins and rings.Pins: Example - "3/16 x 1/2" means the pin is 3/16's of an inch in diameter on the shank of the pin and there is 1/2 inch between the head and the hole. See...

Glue on Studs
MSRP:
Now:
$3.99
Was:
These studs come with our kayak foot braces when the glue-on option is chosen, but we can see lots of other possible applications. A bit of figerglass cloth and epoxy will attach these studs to any...

Racelite Stainless Shroud Adjusters
MSRP:
Now:
$8.89 - $9.73
Was:
Stainless steel - two sizes
For coarse adjustment of wire shrouds or stays. Each complete with two 1/4" dia pins and retainer rings.
Dimensions:
Part
Length
Width
Hole dia.
Strap...

Clevis Rings
MSRP:
Now:
$0.50
Was:
Standard rings for use with clevis pins. Style may vary.
18-8 Stainless Steel

Small 7 Hole Quick-Release Shroud Levers
MSRP:
Now:
$37.50
Was:
Adjust and tension dinghy rigging with the ease of a lever.
C. Sherman Johnson shroud adjusters were designed for one design dinghies to make quick rig adjustments or to de-tension the rig for...

Clamcleat Aluminum Boom Cleat & Keeper
MSRP:
Now:
$6.58 - $10.30
Was:
Aluminum/Nylon/Acetal
Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom (see illustration at bottom of page). Aluminum construction means these cleats will...

Factory West Wight Potter 15 Mast Step with pins
MSRP:
Now:
$80.00
Was:
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.

Well Nuts
MSRP:
Now:
$1.00 - $1.25
Was:
Rubber and brass
These are used primarily to attach items such as kayak footbraces and other pieces of hardware to plastic boats. They work by expanding behind the surface as shown in the photo below...