MSRP:
Now:
$9.74 - $51.00
Was:
— You save
Description
Rudders from 1/2" to 1-3/8"
A set consists of two gudgeons and two pintles. The parts here are sold individually OR in sets. The parts sold individually are represented in the first chart below - you'll need to order two each of the rudder gudgeons and transom pintles to hang a rudder. Various combinations are possible, please refer to spec charts below. The second chart shows recommended sets and are numbered 1 through 4. See the second chart. The sets are outlined in red. Order the set number corresponding to the number of the set you prefer from the second chart below.
Overview of parts
Overview of sets
Pintle Dimensions
Gudgeon Dimensions
xxx
Related Products

Sets of Extra Heavy Duty Transom Pintles and Rudder Gudgeons
MSRP:
Now:
$80.00
Was:
See our pintle & gudgeon compatibility chart
This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel - Fits 1-1/2" through 3" thick...

Rudder Hold-downs
MSRP:
Now:
$2.99
Was:
RL-336 - Spring TypeStainless Steel spring rudder hold-down - 4" long x 3/4" wide - may be used with any of our pin

Racelite Heavy Duty Transom Pintles
MSRP:
Now:
$19.99
Was:
Our RL-690 transom pintles are the same as used on most Lightning class sailboats. They are typically mounted on a flat transom and paired with a rudder gudgeon. More details under "Particulars" tab.

Weekender Rudder Hardware Set (includes pins and rings)
MSRP:
Now:
$74.99
Was:
This is a very robust set of stainless steel rudder hardware. The vertical gudgeon that bolts against the transom is a full 1/8th (0.125) of an inch thick and 1.25" wide. The

Racelite Heavy Duty Rudder Gudgeons
MSRP:
Now:
$22.99
Was:
See our pintle & gudgeon compatibility chart
Our RL-690 rudder gudgeons are similar to our RL-490 pintles but with no pin. They can be used with the RL-690 transom pintle or...
Customers Also Viewed

Racelite 1/2" Pin Heavy Duty Pintles
MSRP:
Now:
$19.99
Was:
1/2" pins - 1" & 2" rudders
These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 2" thick rudder...

Racelite Light Duty Pintles
MSRP:
Now:
$9.99
Was:
5/16" pins - 3/4" - 1-3/16" rudders
These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 3/4" or 1-3/16" thick...

Racelite Extra Heavy Duty Pintles
MSRP:
Now:
$22.99
Was:
3/8" pins - 1-1/2" - 3" rudders
These pintles come in several widths but only one pin length. There is no gudgeon included. All parts are stainless steel - Fits 1-1/2" through 3" thick rudders...

Set of Extra Heavy Duty Pintles and Gudgeons
MSRP:
Now:
$76.99
Was:
See our pintle & gudgeon compatibility chart
This set consists of two gudgeons and two pintles. There is no hold down included. All parts are stainless steel - Fits 1-1/2" through 3" thick...

Set of Heavy Duty Pintles and Gudgeons
MSRP:
Now:
$45.99
Was:
Ideal for larger boats
See our pintle & gudgeon compatibility chart
This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are...

Weekender Rudder Gudgeon
MSRP:
Now:
$18.99
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is...

Canoe/Kayak Rudder Gudgeons
MSRP:
Now:
$8.62 - $18.28
Was:
For sharply pointed sterns
After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the...

Set of Medium Duty Pintles and Gudgeons
MSRP:
Now:
$39.99
Was:
This set consists of two gudgeons, one short pin pintle, and one long pin pintle. There is no hold down included. All parts are stainless steel - Fits 3/4" or 1-3/8" thick rudder. (note: pintle tangs...

Racelite Heavy Duty Pintles
MSRP:
Now:
$13.99
Was:
3/8" pins - 1" - 1-3/8" rudders
These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder...

Weekender Vertical Gudgeon
MSRP:
Now:
$13.80
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically...