Rudder & Tiller

These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They are designed to be mounted vertically in cases where the boat is a double-ender or where a...

For sharply pointed sterns After a lot of consulting with the folks at Race-Lite and with substantial help from Matt at JEM watercraft, we have finally come up with a good solution to the problem of attaching rudders to canoes and kayaks. Use two of...

See our pintle & gudgeon compatibility chart Light duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-358Light duty stainless steel gudgeon 5/8" x 4" x 1/16"pin - 5/16"takes #10 fastener  

RL-336 - Spring TypeStainless Steel spring rudder hold-down - 4" long x 3/4" wide - may be used with any of our pintles and gudgeons. RL-337 - Swivel TypeStainless Steel swivel hold-down - 1" long x 5/8" wide - may be used with any of our pintles and...

A one piece gudgeon ideal for small boats such as PDRacers. Pintle holes are 5/16" but could be drilled to 3/8".Feedback:I recently installed a Racelite 358BR gudgeon as a retrofit on my son's PDRacer (Hull #491). The original rudder hardware consisted...

Extra Heavy duty stainless transom mount gudgeon from Racelite. See Particulars for dimensions. RL-490Extra heavy duty stainless steel gudgeon thickness - .090" plus reinforcing strap3/4" wide x 5-1/4" long x 1" highpin - 3/8"takes...

Often you want a push-pull tiller extension so that you can steer the boat from up on the rail or even from the bench seat if the boat is particularly beamy. This simple swivel from Race-Lite will fill the bill. Two round head #8 or #10 screws mount it...

Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. A curved surface...

3/8" pins - 1" - 1-3/8" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 1" or 1-3/8" thick rudder. (note: pintle tangs can be easily adjusted for rudders...

These gudgeons are used together or with pintles having 1/4" pins. You can use a pin in each set, as in the illustration or a single pin going through all four gudgeons.Parts sold individually or as complete set. Pins not included. You may want a 1/4" SS...

Takes 1/2" pintles There are two different gudgeons in this style - one two hole and one four hole - both take 1/2" pintles. Each gudgeon is actually composed of two parts as shown below. All parts are stainless steel.Typically the four hole gudgeon is...

5/16" pins - 3/4" - 1-3/16" rudders These pintles come in two widths and with either short pin or long pin. There is no gudgeon included. All parts are stainless steel - Fits 3/4" or 1-3/16" thick rudder. (note: pintle tangs can be easily adjusted for...