MSRP:
Now:
$8.99
Was:
— You save
Description
V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
- Lightweight and corrosion proof
- Greater abrasion resistance than traditional plastic cleats
- Low, snag free profile
- Base profile suits mounting on flat and curved surfaces
Uses:
- Control lines on dinghies and catamarans
Material:
- PTFE impregnated, glass and carbon fibre composite
Reference | Imperial | Metric |
Rope à | 1/8 - 1/4 in. | 3-6 mm |
Fastener à | 3/16 in. | 4 mm |
Fastener Hole Centres | 1-7/8 in. | 48 mm |
Weight | 0.4 oz. | 11 g |
Related Products

Ronstan Medium Fairlead V-Cleat
MSRP:
Now:
$13.99
Was:
V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.

Viadana Cam Cleat & Fairlead
MSRP:
$14.30
Now:
$2.49 - $16.99
Was:
Viadana Camcleat
#25.10Takes up to 5/16" rope or line
Comes with manufacturer two-year warranty

Ronstan Swivel Cleat Base
MSRP:
Now:
$82.99
Was:
Alloy cleating arms
Grade 316 stainless steel fittings
Swivel cleat bases permit easy cleating and releasing from any angle.Dead eye


Ronstan Cam Cleat & Guide
MSRP:
Now:
$9.99 - $26.99
Was:
RF5000
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance.
Cam profile and mult-coil spring...
Customers Also Viewed

Ronstan Medium Fairlead V-Cleat
MSRP:
Now:
$13.99
Was:
V-Cleats are a simple solution to cleating lines under moderate loads.Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
Lightweight and corrosion...

Clamcleat Line-Lok™ Cleats
MSRP:
Now:
$0.62 - $5.98
Was:
Easy to tension, easy to release even when wearing thick gloves.
Grips the line to resist being shaken loose-even in extreme conditions.
Two sizes hold a wide variety of ropes - from 0 to 5mm (0" to...

Viadana Inox JamCleat
MSRP:
Now:
$1.49
Was:
Comes with manufacturer two-year warranty
Material - Inox
Min line size - 3mm / 1/8"
Max line size - 6mm / 1/4"
Hole Spacing - 46mm / 1 13/16"
Hole Diameter - 4mm / 5/32"

Seadog Zig Zag Cleat
MSRP:
Now:
$3.85
Was:
Simply weave rope around cleat arms, no knots needed. Great for fender lines, trailer covers and utility lines. Fits line up to 3/8".Part#ABCDFastenerSD-0435403-1/2"15/16"1-15/16"1-3/4"1/4FH
__64915.1601232586.jpg?c=1)
Nylon Open Clamcleats
MSRP:
Now:
$3.56 - $12.53
Was:
A deceptively simple ridged `V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the immediate release of the rope by a short upward and backward pull...

Racelite Stainless Jam Cleat
MSRP:
Now:
$4.68
Was:
Designed for halyards, clew outhauls, topping lift pennants, and other general purpose jobs. Narrow 5/8" base. 3-1/4" long. Takes #10 screws.

Ronstan Urethane Universal Tiller Extension Joint
MSRP:
Now:
$15.99
Was:
Smooth, uniform rotation in all directions and a quick, firm reponse to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller...

Shanty 20 Plans PDF
MSRP:
Now:
$200.00
Was:
LOA = 20'0”
LWL = 20'0”
Beam = 8'0”
Draft = 16” fully loaded
Power = 9.9 HP outboard
Speed = 4-5 knots
Construction, plywood on bulkheads.
Full size patterns to be printed on...

1/4" (6mm) Viadana Single Swivel Block
MSRP:
Now:
$10.99
Was:
Comes with manufacturer two-year warranty
Sheave size - 25mm / 1"
Max line size - 6mm / 1/4"
Overall Height - 42mm / 1 5/8"
Weight - 11 grams / .38 ounces
Breaking Load - 350 kg / 711...

Weekender Rudder Gudgeon
MSRP:
Now:
$18.99
Was:
These gudgeons were developed for the Weekender Set, but will work with many of our 3/8" pintles. (see chart to figure out which will work) They can also be used on a skeg where a regular gudgeon is...