Paddleboats

This a smaller version of our popular 12’9” Waterboy. The design has the same high volume hull with tumblehome and 4 planks per side with a narrow flat bottom as it’s bigger brother. Construction is simple stitch and tape using 4mm ply...

This new design has been floating around in my head for several years now. I really didn’t want to do any kayak or canoe designs, as there are already enough of them out there in the world, and one more wasn’t really needed. So here’s...

A handy row/sail dinghy pram 7'11" x 47" {2.4m x 1.2m} Maximum recommended capacity is 400lbs {182kg} Weight about 55 lbs. {25 Kg} For printed plans for Piankatank River Pram, click HERE The PRP is a great handling little skin-on-frame dinghy designed...

A simple sailing catamaran or tender For Turtle Study Plans, click HERE Rowing and easy sailing boat/ unsinkable/ stability / no centerboard / trailerable / cartopable / single rudder/ selfstanding carbon fibre mast or aluminium, in 2 parts/ furling...

Free plans. To download the file, click HERE Mouse started life as a one-sheeter, that is, an exercise to develop the smallest, cheapest possible boat. As a result, it's not a boat to which you can safely trust your life in any sort of waves - as...

This is a new design for 2001 - we were asked to reduce the length of the Waterman 13 by a foot so that she could be made in 2 boltable halves and fitted into the back of a van for transporting to the water. She was also to be the client's first venture...

The Ocean Crossing Kayak is the first stage in an experimental project - some ocean going kayaks are quite large with volume to carry extensive stores and are made from exotic materials to keep weight down - some have 'castles' at bow and stern so that...

Length 5.35mDesigner: Paolo LodigianiChine hull, Stitch & Glue constructionBuilding Skills: amateurThe NAIADE is a two seat NINFA and has similar characteristics. It is not a real double sea kayak, as this would require an extra meter, as well as...

buy Trilars plans to make Larsboat into a trimaran Larsboat was built by Lars Hasselgren to replace a Folboat that had finally met its end. Lars wanted capacity for two, plus decking, as with his old boat. I took Toto and...

The essence of this design lies in its simplicity. Easy to mark and cut panels, folded onto each other, and sealed with Scotch Waterproof Tough Tape. The tape is applied to all seams, folds and edges, and produces a fully waterproof hull, that is as...

The Hazelnut has been designed for those who want a similar hull shape to the Peterborough model but without the turned up ends. This gives a flatter sheer line more like a guide boat—she retains the 5 plank per side shape with tumblehome for ease in...

Our 15' 8" Fisher Prospector is our most popular canoe design (go to Open Canoes 15'-17'). This new version has been requested by a client who wanted a similar canoe, slightly shorter and with 7 planks per side rather than the 5 of the original design...