Plans & Kits

This is a simple barge with flat bottom single chine shape and a "swim" shaped stern (under the waterline similar to narrow boats). The bow would be vertically staved plywood in 2 or 3 overlapping layers. Construction details are available for the hull...

The sporty 14’ single kayak (now in it’s mark 2 version) has a beam of 24’’ and a ‘V’ bottomed soft chine shape giving plenty of stability with a very good tracking and low wetted surface area hull...

The Bocar 8 is born out of a wish to get even! A couple of years ago I was asked to design a 6' dinghy which would form the lid of a car roof box. I duly did this but received no Royalties - the product featured on two TV programs in the UK, died a...

Traditional gaff rigged day-boat For a Beg-Meil study plan instant download, click HERE Hull length / waterline 4.46 / 4.06 m   Sail area 14.3 m²   Breadth / waterline 1.68 / 1.46 m   Outboard motor 4...

It is axiomatic that the jack of all trades does nothing well. There are exceptions, however. The Vita Dinghy is one. A list of desirable attributes might include the following: easy construction with minimal skills, low cost, permanently tight, strong...

The Baby Raven is a smaller version of the Raven canoe and has a similar midship shape with tumblehome—this puts the maximum beam down at the waterline maximizing stability whilst at the same time making it easier to paddle. She has 3 chines per side...

You will also need Larsboat plans to complete this project.I also drew up a trimaran sailing rig for Larsboat called "Trilars" which is sold separately. It is pretty much a clamp on rig except for the small mast step and partner. Here a photo of a model...

After designing and building the 8ft Nuthatch Pram, I thought that a larger version of the hull would be a good fit in my series of stitch and glue boats. This is the finished design of the12ft"fishing" version, and I have a 14ft version in the early...

Click HERE for Free Study Plans Download Full size templates for this boat are available HERE a 15' 1" x 5' 4" Runabout Specifications Length - 15' 1" Beam - 5' 4"Bare Hull Weight - (approx) 270 lbsPower Requirement: 10 to 30 hp, short shaft...

Although only 6' long we have given her good internal volume with a beam of 3'8". This gives plenty of buoyancy in the ends of the boat so that she does not exhibit the usual tippiness of craft of this size. Her overall weight will be less than 50 lbs...

The Tasman is a multi-chine plywood yacht designed for long distance sailing for 2 crew, which uses an egg-box frame system of plywood fore and aft girders slotted together with plywood bulkheads - once stringers have been fitted, the ply hull panels are...

A lovely little skiff made from four sheets of 1/4’’ plywood using simple stitch and tape techniques. She has a fine entry for moving quickly and easily under electric outboard power (a conventional petrol outboard may also be used) with...