Plans & Kits

Overall Length 18'-8-1/2" Overall Beam 46" Weight 148 lbs. Volume 147.6 c.f. CRUISE AT YOUR OWN PACE! There's an exciting new class of high-performance rowing boat from the drawing board of small-craft adventurer Colin Angus: The RowCruiser. This...

Campjon is based on my Jonsboat design. I increased the hull depth to 24" from 18" and again to 30" in the region of the 6' long cuddy cabin. The cabin decks slope upward towards the center so the "headroom" in the middle is about 3', usually that is...

Multi-purpose, can be rowed, motored or sailed and is light enough for one person to lift on and off the family car or yacht. Simple stitch and glue construction, it can be built with the minimum of tools, no previous boatbuilding experience and in...

Note: This is the study plan, for the full plans click HERE The ECO 6 looks like the ECO55 cruiser, but it is a completely new design. The small increase of only 0.5m and increasing the total beam to 2.84m created a lot of possibilities. The...

The approval for Runabout came from my readers, for a small portable motor boat of traditional hull design. It includes an ample beam, good freeboard, generous internal volume, multi-seating, and safety buoyancy. It is sturdy, easy to build, portable and...

The photo shows the prototype Frolic2 built by Larry Martin of Coos Bay, Oregon. Larry built the boat quite quickly this past winter including sewing the sail to the instructions given in the plans. He reported sailing it for the first time on a ripping...

Free Study Plans HERE Full size templates for this boat are available HERE Volare Console Version Volare comes in three versions. This is the tiller steered utility version, the  console version is available as a separate set of plans. There...

Smaller sister to the Edwardian 26, the hull of this version has also been based upon the Lifu launch. Her lines have, however, been further deepened so that she can also take the weight of batteries for electric propulsion. A 1.4 hp 48 volt motor may...

This 12' x 4' rowing/sailing skiff was designed for Mr. M. Goodger who wanted a light, seaworthy skiff which would row well and optionally take a modest 35-50 sq ft sail. The attractive 5-plank hull is therefore based on the Stornoway 9. The drawings...

These plans are instant download - you will need to print the 22" x 34" sheets.. For printed plans, click HERE. A versatile half-canopy launch, offering many internal layout options. She is especially suited for employment as a personnel launch or...

The Cape Cod is a motor dory based upon the Swampscott model with it's flat but rockered bottom panel and 4 planks per side. Unlike the sailing Swampscott, the bottom is kept fairly wide aft so that she can take a reasonable size of outboard (up to 35...

Free PDF Model to print, cut and build - click HERE I decided to add this smaller version of the Electric Moto Craft to my growing fleet of hulls after attending the first Electric Boat Show in Seattle, at the Center for Wooden Boats on Lake Union...