Plans & Kits

The most popular sail and oar boat For a digital Study Plan for Ilur, click HERE Hull length / waterline 4.44/ 4.10 m Sail area 12.2 m² Breadth / waterline 1.70 / 1.46 m Outboard motor 4 hp Draught 0.25 / 0.86 m Design category /...

A fast and narrow pocket cruiser, with a double bunk, and place for all your camping stuff.- LOA 4.70 m x beam 1.64 m- SA 9.9 m² - Bermudian or gaff rig. - Weight 250 kg- Weight full load 500 kg- Cruiser for two, daysailer for 3 (CE D/3)Full plans in...

A Dutch client asked us to use the original KARI - 2 as a model for a craft not too much longer but capable of having a small cabin area which could take 2 or 3 bunks along with a small cooker and wc. We looked at the original section of the boat and...

26' clinker built cruiser "ROBINSON CRUSOE" - 26' Cruiser, clinker built, wood. Includes outboard profile, lines, offsets, scantlings, arrangements, construction plans. 4 sheets.

This is an outrigger canoe of classic Hawaiian design. Classes of these craft are very popular, especially in places like New Zealand where they are raced in various lengths—this example being one of the shortest. They are noted for their stability...

The Goshawk was designed for an American company for use in their boat hire business. The design brief called for a boat which was tough and which, for only a 16' length, would have as comfortable a cabin space as possible. To go with this, she had to be...

Af4 Grande is a 20% scaleup of the original AF4. Scaling a design can be interesting. If the design is scaled up by a factor of1.2 as it was here then the areas of all the panels are increased by a factor of 1.2 squared (1.2 times 1.2) which is 1.44...

The photo above is of a Piragua built by Bob Taylor down in Texas. Piragua is a very simple useful boat. I probably get more Piragua photos than of any other boat, an indication that more Piraguas get built. Piragua is made from two sheets of 1/4"...

A sensational sailing canoe 15' 3" x 38" - 4.65m x 94cm Maximum recommended capacity - 375lbs - 171kg Weight: 65lbs - 30kg Sail area: 61 square feet - 5.7m For printed plans of Chautauqua, click HERE CHAUTAUQUA (shuh-TAW-kwuh) Chautauqua is a SOF decked...

Mayfly14 is a straight forward flat bottomed plywood skiff for sailing and rowing. She's easy to build because her planks have no twists. That means that the chine log and wale bevels are constant for all practical purposes and can be presawn before...

The name ‘Peterborough’ was often used to describe any open Canadian type canoe but more especially those with a lightly rockered hull which had a moderate beam and some tumblehome. Our example has relatively narrow waterlines fore and aft to make...

For Scraps as printed plans, click HERE Our tides here run to 10 or 12 ft, which means that little Spook has to be anchored out in close to 20 ft of water at high tide in order to not be aground at low tide. Spook, my 18ft gaff sloop lives on a trailer...