Paul Fisher

The CR25 (Cruiser racer 25) is a multi-chine ply yacht designed for easy unitized construction with ply bulkheads slotting into ply fore and aft girders to form the basic framework - the girders...

The Edwardian 50 has been designed for canal and inland river use. She has a beam of 7'6" which allows her to navigate much of our inland waterways and a height (air draft) which will let her get...

The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an...

This design, for a Dutch client, has 8 planks per side which are simply stitched together edge to edge and finished with epoxy and tape. She may be fitted out in many different ways but the standard...

This canoe is based upon our Baby Raven which is an all round general purpose canoe—this asymmetric version gives a slightly faster craft for single handed use—she would also make a good sailing...

At 26'3" length on deck, the Fulmar is a heavy displacement cruising yacht which fits a spacious layout into a relatively short length. Her construction is of multi-chine ply extensively using...

The Galway 18 has been designed as a replacement for a client’s ageing Lysander and incorporates a number of his thoughts and ideas on the design of a safe cruising boat of this size. The main...

For something quite a bit larger Kane and Able are two separate Suffolk Beach punts. Both have the same overall length, beam and arrangement. Kane is built using the clinker ply method and computer...

The Lakeland 25 is a modern double chined pulling boat designed for use on lakes, estuaries and offshore by outward bound organizations, scout groups etc. No frame set-up is required - she is made...

Note: This supplement lets you use the Rose 15'3" plans to build a 17' 9" version described below. You need the Rose 15" 3' plans as well as this supplement.___________________________For those...