Larger Rowboats

This 12' x 4' rowing/sailing skiff was designed for Mr. M. Goodger who wanted a light, seaworthy skiff which would row well and optionally take a modest 35-50 sq ft sail. The attractive 5-plank hull is therefore based on the Stornoway 9. The drawings...

While the MARIETTA YAWL and the CRESTWOOD GIG are designed to appeal to secondary school students and disadvantaged youth, they should interest others. Neither sex nor age nor athletic prowess are limiting factors. Some of the handicapped have become...

This is a 14’ (4.27m) x 4’2” (1.27m) stitch and tape/clinker/ply Thames Skiff – similar to our Thames 12 skiff - for Mr. B. Lammerton - she retains the same “wineglass” type transom and construction is for stitch &...

The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose launch, she could be fitted out in a variety of...

Plans are now available here for the double ended St.Bronagh skiff designed for Tyrone Boats for coastal rowing - she has a low wetted surface area hull capable of excellent performance in offshore conditions with two crew and a cox. The plans are for...

The Loddon 20 is round bilged and can be made using foam sandwich (FRP) and strip plank Cedar construction methods. The moulds, transom and inner stem shape. She is designed for 2 or 3 rowing plus a cox or 2 rowing plus cox and passenger. The hull shape...

The Deben 400 is a rowing skiff inspired by the Cornish Flashboats—they were 18’ or more in length and used around Fowey for river transport. This version is just under 13’ long and for single recreational rowing. She has a narrow flat bottom...

While competitive and recreational rowing is the reason behind the design, there are other possible uses for it. It can be rigged to sail, and being light and easily driven will go well with a fairly small rig. A centerboard trunk is an easy modification...

I have often been asked to stretch the basic Thames 12 design—using the same beam—to a skiff capable of having 2 rowing positions—we now have this in the 17’ Thames Skiff which has the same attractive 5 planks per side hull shape and using the...

The Oarsome 15'2" skiff has been designed for the Oarsome Chance Foundation as a simple stitch and tape ply skiff. Oarsome Chance focuses on young people aged from 9 -19 years old who are disengaged from mainstream education and are at risk of...

The Port Sorell 16 is a skiff for rough waters having generous freeboard and fairly full sections fore and aft. This means, that for her type, she is a good load carrier and can be rowed single or double. For those wanting a good general purpose rowing...

The Lakeland 25 is a modern double chined pulling boat designed for use on lakes, estuaries and offshore by outward bound organizations, scout groups etc. No frame set-up is required - she is made using simple stitch and tape techniques with computer...