Dart 22 Plans

Write a Review
Printed plans shipped and PDF plans emailed from Selway Fisher


The DART 22 uses a similar section to that of the Dart 16. This consists of a tortured ply ‘U’ shape which changes fore and aft into a full ‘V’ giving adequate buoyancy and a good entry at the fore foot. Above the shaped bottom there is a soft chine and flat top sides giving an efficient and handsome shape coupled with ease in construction. As with many of our other designs, the chine stringer is square sectioned and the ‘V’ gap between it and the adjacent topside panel is filled with an epoxy fillet doing away with tedious beveling and speeding up the construction process. The hull has large buoyancy compartments fore and aft and in the centre which can also be used for stowage via watertight hatches. 6 to 7 sheets of 4mm plywood are used in her construction and these may be Exterior grade. Rudder details are also shown on the drawings.

Dart 22 Particulars

LOA 22' 6.71m
Beam 27" 0.69m
Mid Depth (Deck to hull bottom) 15" 0.38m
Approx. Dry Weight 110lbs 50kg
Approx. Capacity 650lbs 295kg

Hull Shape

U bottom with single chine
Construction Method Stitch and tape
Plywood Requirements 5-6 sheets of 4mm
Guidance Use Sea and General Purpose
Drawing/Design Package 3 x A1 sheets + 6 A4 sheets - includes rudder details.

View AllClose

0 Reviews

View AllClose