Motor Boats over 30'

This new design was originally drawn up for Cedar Strip construction but drawings were added later for single skin GRP construction too with the plug based on the original strip planked hull. The hull uses the classic easily driven shape of our...

After many requests, we have extended the simple concept of the Power 1 and 2 motor launches to a length of 32' with a beam of 10'9". At the moment, the drawings for the hull and deck construction are available allowing the client to choose or design...

These plans are for the steelwork only of a 17.45m (57') wide beam barge. The plan set consists of 6 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes and Rudder...

One of our clients wanted to match the advantages of strip planking with an easily built but attractive motor barge hull. In stead of using a slab sided hull seen on so many modern steel barges, we have been able to use the ability of strip planking to...

These drawings show the construction details for the plywood hull only of a 55' x 15' (16.78m x 4.58m) single chine (with spray rail) 'V' bottomed motor yacht capable of speeds up to 25 or more knots. Full details including computer generated and...

Similar to the 55 footer below, we have details for the construction of a 35' steel motor yacht hull. The plans include the steel work drawings for the hull and engine beads and the computer generated hull panel shapes. She has a beam of 11'6" (3.5m)...

This is a shortened version of the 45' Teign Motor Barge and has the same flat bottom panel for maximum capacity and ease of construction. We have the plans for the hull construction in, strip plank, plywood and steel. Also note that we have now added...

We have drawn up the steel construction details (hull, deck, sterngear and rudder details only) for this 32' canal boat based on a tug design with a fantail aft end and narrow boat lines amidships running into a tug type bow. She may be fitted out in a...

These plans are for the steelwork only of a 17.45m (57') narrowboat. The plan set consists of 7 drawings covering Hull Construction, Hull Construction Details, Deck/cabin Construction, Deck/cabin construction details, Hull panel shapes, Rudder and engine...

The Bullfinch is a typical standard steel narrow boat with a cruiser stern for home construction. The drawings and details are for the hull, deck and superstructure steel work only. Engine bed and rudder details are also shown. A study plan showing a...

This is a steel multi-chine motor barge for use in the waters of the UK and Europe, crossing the Channel and exploring the rivers and canals of the European mainland. She has a section of parallel middle-body which means that she can be stretched. She...

This is a simple barge with flat bottom single chine shape and a "swim" shaped stern (under the waterline similar to narrow boats). The bow would be vertically staved plywood in 2 or 3 overlapping layers. Construction details are available for the hull...