GP Dinghies to 13'

Because most of our designs have their offsets and panel shapes stored on the computer, altering a particular design to suit a clients individual requirements of length, beam and draft, can be undertaken easily and quickly. The Highlander 9' is a good...

The Skylark 12 is capable of having a small cuddy fitted forward for protection and shelter or simple dry storage of gear. Side benches can be fitted with storage or buoyancy under and the whole boat is big enough to be fitted out to your own...

The Bocar 8 is born out of a wish to get even! A couple of years ago I was asked to design a 6' dinghy which would form the lid of a car roof box. I duly did this but received no Royalties - the product featured on two TV programs in the UK, died a...

Although only 6' long we have given her good internal volume with a beam of 3'8". This gives plenty of buoyancy in the ends of the boat so that she does not exhibit the usual tippiness of craft of this size. Her overall weight will be less than 50 lbs...

The Cegall has been designed for Chippendale Craft and is very much based upon the 14' Kingfisher design. The method of construction is just the same with a pre-shaped ply centre girder forming the centreboard case and stem - this is epoxied to the...

Several years ago I was asked by PJS Boats to draw up a modified Highlander 16 dayboat with a real seagoing jaunty sheer and plenty of stability to take a powerful rig. The Westray 16 was born and later they asked me to design a smaller dinghy in...

This is a very simple but pretty single chine 'V' bottom dinghy designed for use as a tender, fishing boat, or with her simple lug rig, as a sail trainer for your children. Length is 7'9" (2.36m); Beam 4' (1.23m); Weight approx. 55 lbs (25 kg)...

The Simplicity 8 Classic is modified version of the original Simplicity 8 which was designed for simple stitch and tape construction. In this case, the drawings for the Classic version show details for her to be built using the ply over frame method. A...

We have 4 or 5 Swampscotts (plus several other Dories of different type) with their rockered bottom panel and rounded topsides.   The Petite Brise 12'4" Dory Skiff was designed to be used as the new tender for the famous Jolie Brise French Pilot...

The 10' Highlander uses 3 sheets of 6mm (1/4") ply and is considerably larger than it's smaller sister and is ideal for use as a general purpose tender or fishing boat. Her lug rig makes her ideal for teaching children to sail and her topsides are high...

We have designed the Skylark 9 for a Tasmanian client who needed a dinghy which was not so big that he could not handle it in and out of the water by himself and which could handle a short, steep chop and blowy conditions safely. The dinghy also had...

The Ariel pram dinghy was originally designed for Joseph Thompson & Co. Ltd., for them to produce in kit form to promote their Cedar Speed Strip product. Speed Strip is still available from them but they are no longer producing the kits and the plans,...