GP Dinghies to 13'

Over the years I have often been asked about the design for a nesting dinghy. The Skylark pram dinghies have often been split at their centre frame and built with 2 frames back to back so that the forward end fits into the aft end and this has worked...

This new design is based on the Mark 1 single chine version of the Rhum 11'6" general purpose dinghy. The original Rhum has been extended by 12" which gives more space for her to be fitted out as a proper camping dinghy with space for a sleeping area and...

This is the first of a new line of dinghies and dories which combine traditional looks and performance with quick and easy methods of construction. We have been able to modify the normal clinker plank shapes for this boat so that they can be stitched...

I have now updated one of the first Selway Fisher designs, the Highlander 7'6". The original design was drawn up in the 70's well before computers and boat design software was available - so the design started with a carved half model from which the...

Designed for a client who wanted a simple stackable fishing dinghy which he could easily carry himself, the Doracle uses just 2 sheets of 4, 5 or 6mm ply. She may be built in 2 pieces with the forward piece stacked inside the aft section. The 2 halves...

The concept of the Northumbrian 10'6" came from the need to have a sturdy and very seaworthy small working dinghy which could be rowed, sailed and motored easily and which would weigh no more than 70 lbs or so. She also had to have a striking appearance...

A client contacted me with the requirement for a self build or kit club racing dinghy for her daughter as a step up from the Mirror dinghies and which could also be built quickly and cheaply by a youngster. The HOBO 12 is the result. LOA...

The Stornoway 9 is the first of a new class of dinghies which incorporate firm bilges and moderately full transoms needed to carry loads safely and to give good sailing qualities without dragging a large transom through the water. The plank shapes...

The Skylark 10, for her length, is a large dinghy and quite capable of accommodating a family of 2 adults and 3 children comfortably. Several 10's have been built by clients who have a spare rig (Mirror etc) and who want a simple and easily built hull...

The Highlander 11' Dinghy - this is a relatively new design with a beam of 5'2" and draft of 7"/3'1". Approx. weight is 105 lbs and Sail Area is 66 sq.ft. The hull shape very much follows the original Highlander model with it's double chine, except...

13’x 6’x 8‘‘(2’9’’ with board down). A miniature cat boat of traditional design given modern construction techniques. Using the stitch and tape method with pre-shaped ply hull panels weight, cost and building...

The design for the Surf 8 started with the need for a small dinghy that would have pretensions to be a small multi role dayboat - an excellent sailing craft, motor boat and still be easily car toppable. Taking the Skylark...