Potter 15 Stem Fitting

This package (which is also suitable for many other small sloops if you adjust halyard lengths) allows the Potter 15 sailor to securely raise and lower all sails without leaving the safety of the...

All Stainless heliarc welded construction for extra strength. 3-1/4" long by 1-1/2" wide, tapering to 5/8" at ends. Holes take # 10 flat head screws or bolts. Fin is 2-1/2" long & 1/8" thick with...

Masthead fittings for both Potter 15 and 19

Built with a stem for extra strength. Base 3" long by 1.5" wide tapering to 5/8". Stem is 4" long, 5/8" wide & 0.085" thick w/ 3 1/4" holes. Takes up to 6 #10 screws. Fin has two 1/4" holes and...

This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan...

Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.

Package pictured above is cut from our premium Raid Braid polyester double-braid and color coded with mainsheet and halyards in "Yacht" white and jib sheets and halyard in "Stainless" silver color...

sold individually - mounting fasteners not included

This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.