Potter 15 End Boom Sheeting System
- SKU:
- DW-WWP15-EBSS
Description
This simple but effective system allows the Potter 15 to be sheeted entirely from the end of the boom, keeping the cockpit clear and the sheet right at hand. Package includes performance Ronstan blocks (one for boom and one for the traveler), and a block/cam cleat combo. Also includes factory-recommended length of mainsheet and traveler line and a photo of proper configuration.
This setup would work well on many other small boats as wellâsimply pull up to cleat, or down to free the sheet.
View AllClose
This setup would work well on many other small boats as wellâsimply pull up to cleat, or down to free the sheet.
Related Products
Boom Vang System for Potter 15 and 19
$95.00
Boom vang system for Potter 15 or 19. Includes Ronstan block, combo V-jam block, shackle, 2 eye straps, and proper length of polyester double braid.
Potter 15 Singlehander's Package
$250.00
This package (which is also suitable for many other small sloops if you adjust halyard lengths) allows the Potter 15 sailor to securely raise and lower all sails without leaving the safety of the...
West Wight Potter 15 Lines Package
$175.00 - $200.00
Package pictured above is cut from our premium Raid Braid polyester double-braid and color coded with mainsheet and halyards in "Yacht" white and jib sheets and halyard in "Stainless" silver color...
Factory West Wight Potter 15 and 19 Gudgeon
$21.95
sold individually - mounting fasteners not included
Factory West Wight Potter 15 Mast Step with pins
$99.00
This is the factory Potter mast step and will fit most years (some early models are different). The factory riveted the mast foot insode the mast, but 10/32 drill and tap works fine as well.
Potter Chainplates
$16.00
These U-bolts are used for the chainplates on the Potter 15 and for the Baby Stay on the Potter 19
On Sale
Boom Socket
Now:
$24.50
Was:
$26.99
Boom socket, 13mm (1/2") hole, suits use with (Rf2524 and RF2527 not currently for sale on Duckworks.com)
Material: Alumimum
Dimensions: 2" Long x 1-1/8" High x 1-1/2" Actual width of the flange
Factory Potter Chainplate
$45.00
These stainless chainplates are used for both the Potter 15 and the Potter 19.