Cabin Powerboats

The Skellig 26 is a wood version of the Saltee Island. She has the same rugged hull design for use as a workboat/fishing boat for coastal and offshore use. She has a large cockpit and enclosed wheelhouse with space below for a simple wc and/or galley...

The Skellig 19 is based on our Skellig 18 workboat/fishing boat. In this case the client wanted a slightly bigger boat made of steel to be used as a strong and rugged work/fishing boat in Irish waters. The hull plating is 3mm over 4x75mm frames...

A 21' x 7' bigger sister to the Power 1 design using the same easy construction method and having a similar double chine construction with a flat bottom panel simplifying her building and producing an easy planing hull form. The hull, seats and cabin...

The Whooping Swan is a development of the 16' Grey Swan pocket cruiser - a client asked me to alter the hull so that it would take an outboard with a wheelhouse - in doing this we have added buoyancy to the aft end and made the transom more vertical to...

AF4 is a simple low powered cuddy cruiser intended for protected waters. Kilburn Adams of St. Louis brought a boat similar in spirit to AF4 to our Midwest Messabouts and it was easy to see what a good idea this is. Kiburn's boat was a modified Sturdee...

Af4 Grande is a 20% scaleup of the original AF4. Scaling a design can be interesting. If the design is scaled up by a factor of1.2 as it was here then the areas of all the panels are increased by a factor of 1.2 squared (1.2 times 1.2) which is 1.44...

The Howth Head is a plywood version of the steel Lambay Island design. Like the Lambay, she is a 22' motor boat with a large cockpit area and comfortable accommodation with 2 large berths, w.c. compartment and galley with dining space in the cockpit...

The smallest practical cruiser. For Elco 26 Study Plans click HERE "ELCO 26 PLANS" - Original 26' classic cruiser, wood. Original Elco design, redrawn by designer Tom Beard. 25' 11" LOA, Beam 8' 6", Draft 2' 3". Includes arrangements, lines, table of...

This craft is a widened and a more sophisticated version of our Power 2 design. The bottom panel has been slightly veed to give a softer ride and her depth has been increased. This along with her wider beam enables her to be fitted out with a more...

The standard 17' Rufus plans include the frame and panel shapes for both a 20' and a fantailed stern version but we have been getting many requests for a slightly longer version and so we jumped at the chance to draw up a completely new set of plans when...

The Jarvis 17' motor launch has been drawn up for clinker/ply construction - a building jig is made which consists of chipboard mould shapes mounted on a strongback. Ribbands (stringers) are inserted into the moulds at each lap and these help in...

"TRUMPET" - 18' Rough water clinker-built runabout, wood. This is a modified v-bottom outboard powered "pocket cruiser", with cuddy cabin and bunks forward. 6' 6" beam. Includes 1958 original article run in Sports Afield's Boatbuilding Annual, lines,...