Plans & Kits

Oracle might have been called Roar3. It is a bit longer and lower than Roar2 so it looks sleeker. It is actually closer in shape to my Toto canoe. I'm pretty sure it is a visual improvement over Roar2. Hard to say if it is a practical improvement. Being...

The CR25 (Cruiser racer 25) is a multi-chine ply yacht designed for easy unitized construction with ply bulkheads slotting into ply fore and aft girders to form the basic framework - the girders form cockpit seat and bunk fronts. Stringers are then...

Jenny Wren is three sheets, 1 @30" x 36", 2@ 24" x 36" Sometimes, dreams get passed through generations. Here's a pleasant one that was conceived by Charles G. Davis somewhere around 1905 and remembered by Weston Farmer in 1976. No doubt she'll spawn...

The Edwardian 50 has been designed for canal and inland river use. She has a beam of 7'6" which allows her to navigate much of our inland waterways and a height (air draft) which will let her get under most bridges. Her construction drawings are for...

The IC10 - a ply stitch and tape "B" Class International Canoe for Mr. Peter Rhodes-Dimmer - the first hull has been constructed by Alan Powell. The major idea behind this design was to produce an up-to-the-minute hull shape suitable for both inland and...

This design, for a Dutch client, has 8 planks per side which are simply stitched together edge to edge and finished with epoxy and tape. She may be fitted out in many different ways but the standard drawings show her with a steel centreboard which is...

DESCRIPTION ARTEMIS was designed as a solo cruising sailing canoe and as a paddling canoe for two. Brian Pearson (aka keyhavenpotterer) provided so much input that I name him as a co-developer here. ARTEMIS started as a design for myself, to be used on...

For a Digital Download of Joahsa Plans, click HERE A while ago I spent a season cruising in a very capable light dory I'd designed, the trips ranged from a week which took me from Dargaville down the Kaipara harbour to Helensville, to an afternoon trip...

  10ft Nuthatch Specifications Length: 9' 11"Beam: 56"Weight: 95 lbsMax Outboard: 5 hpMax Load: 500 lbs After designing and building the 8ft Nuthatch Pram, I thought that a larger version of the hull would be a good fit in my series of stitch and...

This canoe is based upon our Baby Raven which is an all round general purpose canoe—this asymmetric version gives a slightly faster craft for single handed use—she would also make a good sailing canoe and would fill the remit of a slightly smaller...

A Rowing Shell that can be built in any of 3 lengths Length 24', 26', or 28'Beam 12"Maximum recommended paddler size: 230lbs / 104kgWeight is about 35lbs / 16kg For printed plans for Veloce' Racing Scull, click HERE Key points - Can be built in 3...

At 26'3" length on deck, the Fulmar is a heavy displacement cruising yacht which fits a spacious layout into a relatively short length. Her construction is of multi-chine ply extensively using pre-shaped ply bulkheads and girders. The forward...