Plans & Kits

This is a 14’ (4.27m) x 4’2” (1.27m) stitch and tape/clinker/ply Thames Skiff – similar to our Thames 12 skiff - for Mr. B. Lammerton - she retains the same “wineglass” type transom and construction is for stitch &...

The Port Pegasus is a clinker boat which may be used as a pure rowing boat or fitted with a small diesel (ie Farymann 7.5) as a small motor launch with classic appearance.   As a general purpose launch, she could be fitted out in a variety of...

DUET 3 Utility Boat - A two or three module transportable that has the capacity to hold a small family. With built-in safety buoyancy and generous freeboard, it can provide great family fun. Easy to build and assemble at the water, it fits in all trucks...

RIVER ROVER - This is a new boat, specifically designed for shallow water use, and can be constructed in different lengths and widths. The size you need is dependent on load and the number of occupants desired. Much like a pirogue, the longer hull...

16’x 6’4’’x 8’’ (3’6’’ with board down). Approx. 450 lbs. lightweight with 120 lbs. of ballast. An ultra simple cruiser of double chine shape using pre-shaped ply panels for the hull. Can sleep two in...

Plans are now available here for the double ended St.Bronagh skiff designed for Tyrone Boats for coastal rowing - she has a low wetted surface area hull capable of excellent performance in offshore conditions with two crew and a cox. The plans are for...

Hardware and Lines Kit for Angus Sailing Rowcruiser The Duckworks part of the list of hardware bits for the Angus RowCruiser as shown on the Angus Row Boats website. A complete list of items in the kit:   Complete Set 1 3/8" Pintle and Gudgeon set...

The Power 1.3 is a development of the original Power 1 design. In this case, we were asked to produce a simply built hull with more capacity and suitable for offshore and estuary conditions. We have retained the flat bottom section which eases and...

The SAM is not suitable as a cruise boat, even if a "Spartan" sports crew might use it occasionally also for this scope - as long as it is clear that its main purpose is that of a nautical camping boat, rather than a real cruiser. The PUCK REGATA has...

This launch has been designed for diesel propulsion (10-15 hp) but she can also take steam or electric propulsion. The layout drawn for her is a simple open thro' plan with no obstructing bulkheads but she could be fitted out in a variety of ways - a...

Apparently, "Toshing" was the taking of copper from laid-up warships. We have used the Mevagissey Tosher as the model for this boat. They were renowned for their speed and sea keeping qualities and apart from removing copper they were also used for...

This design is based upon the traditional daysailers and small yachts that can be hired on the Norfolk Broads. Construction is Cedar strip planking over computer faired moulds/jig. The mast is stepped in a tabernacle for easy raising/lowering and she can...